𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Microstructure and mechanical properties of spray formed ultrahigh-carbon steels

✍ Scribed by Jing Guo Zhang; Yi Jian Lin; Mats Hillert; Malin Selleby; Hai Sheng Shi; Biao Yan; Hao Zhang; Guang Min Luo; Xiao Jun Li; Jun Wang

Publisher
Elsevier Science
Year
2004
Tongue
English
Weight
227 KB
Volume
383
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Mechanical properties of Ultrahigh Boron
Mechanical properties of Ultrahigh Boron Steels
✍ Dr. JosΓ© A. JimΓ©nez; Dr. Gaspar GonzΓ‘lez-Doncel; Prof. Oscar A. Ruano πŸ“‚ Article πŸ“… 1995 πŸ› John Wiley and Sons 🌐 English βš– 761 KB
Microstructure and mechanical properties
Microstructure and mechanical properties of spray deposited hypoeutectic Al–Si alloy
✍ C.F. Ferrarini; C. Bolfarini; C.S. Kiminami; W.J. Botta F πŸ“‚ Article πŸ“… 2004 πŸ› Elsevier Science 🌐 English βš– 207 KB

The microstructure and the tensile properties of an Al-8.9 wt.% Si-3.2 wt.% Cu-0.9 wt.% Fe-0.8% Zn alloy processed by spray forming was investigated. The alloy was gas atomized with argon and deposited onto a copper substrate. The microstructure was evaluated by optical microscopy (OM), scanning ele

Mechanical and microstructural propertie
Mechanical and microstructural properties of low-carbon steel-plate-reinforced gray cast iron
✍ Ahmet AvcΔ±; Nevzat Δ°lkaya; Mehmet Şimşir; Ahmet Akdemir πŸ“‚ Article πŸ“… 2009 πŸ› Elsevier Science 🌐 English βš– 715 KB

In the present experimental study, strengthening of gray cast iron by reinforcing with steel plates was investigated in the as-cast and normalized conditions. Normalizing heat treatments were applied to the specimens at temperatures of 800 β€’ C and 850 β€’ C. Three-point bend specimens were manufacture