𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Microstructure and mechanical properties of spray-deposited Al–Zn–Mg–Cu alloy

✍ Scribed by Feng Wang; Baiqing Xiong; Yongan Zhang; Zhihui Zhang; Zhixing Wang; Baohong Zhu; Hongwei Liu

Book ID
108200695
Publisher
Elsevier Science
Year
2007
Weight
823 KB
Volume
28
Category
Article
ISSN
0261-3069

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructure and mechanical properties
Microstructure and mechanical properties of spray deposited hypoeutectic Al–Si alloy
✍ C.F. Ferrarini; C. Bolfarini; C.S. Kiminami; W.J. Botta F 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 207 KB

The microstructure and the tensile properties of an Al-8.9 wt.% Si-3.2 wt.% Cu-0.9 wt.% Fe-0.8% Zn alloy processed by spray forming was investigated. The alloy was gas atomized with argon and deposited onto a copper substrate. The microstructure was evaluated by optical microscopy (OM), scanning ele

Microstructure and deformation in the sp
Microstructure and deformation in the spray deposited Zn–22% Al alloy
✍ Yuwei Xun; Farghalli A. Mohamed 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 700 KB

Microstructure and deformation in Zn-22% Al that was prepared by spray atomization and deposition were investigated. The results show that the as-deposited alloy exhibits a non-uniform microstructure composed of coarse and fine lamellar eutectoid domains, and that elongations to failure in tensile s

Microstructure and mechanical properties
Microstructure and mechanical properties of spray deposited and extruded/heat treated hypoeutectic Al–Si alloy
✍ L.A. Bereta; C.F. Ferrarini; C.S. Kiminami; W.J.F. Botta; C. Bolfarini 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 458 KB

The microstructure and the tensile properties of an Al-8.9 wt.% Si-3.2 wt.% Cu-0.9 wt.% Fe-0.8% Zn alloy processed by spray forming was investigated. The porosity level, the conditions of the heat treatment applied and the presence/addition of certain alloying elements to this alloy is known to grea