✦ LIBER ✦

Microstructure and mechanical properties of NiAl–Cr(Mo)/Hf alloy prepared by injection casting

✍ Scribed by K.W. Huai; J.T. Guo; X.H. Du; R. Yang

Book ID: 108200712
Publisher: Elsevier Science
Year: 2007
Weight: 703 KB
Volume: 28
Category: Article
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2006.04.024

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Significant Improvement of Mechanical Pr

Significant Improvement of Mechanical Properties in NiAl-Cr(Mo)/Hf Alloy by Suction Casting and Subsequent Hot Isostatic Pressing

✍ J. T. Guo; K. W. Huai; H. T. Li 📂 Article 📅 2007 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 622 KB

Compressive Mechanical Properties of NiA

Compressive Mechanical Properties of NiAl/Cr(Nb) Alloy Prepared by Rapid Solidification Processing

✍ X. H. Du; J. C. Huang; B. L. Wu 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 666 KB

Microstructure and Mechanical Properties

Microstructure and Mechanical Properties Determined in Compressive Tests of Quasi-Rapidly Solidified NiAl-Cr(Mo)-Hf Eutectic Alloy After Hot Isostatic Pressure and High Temperature Treatments

✍ L. Y. Sheng; L. Nan; W. Zhang; J. T. Guo; H. Q. Ye 📂 Article 📅 2009 🏛 Springer US 🌐 English ⚖ 619 KB

Microstructure, brittle–ductile transiti

Microstructure, brittle–ductile transition temperature and elevated temperature compressive behavior of the directionally solidified NiAl–Cr(Mo)–Hf alloy

✍ C.Y. Cui; J.T. Guo; H.Q. Ye 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 683 KB

Effect of nitrogen on the microstructure

Effect of nitrogen on the microstructure and mechanical properties of a CoCrMo alloy

✍ José Escobedo; Juan Méndez; Dora Cortés; Juan Gómez; Manuel Méndez; Héctor Manch 📂 Article 📅 1996 🏛 Elsevier Science ⚖ 912 KB

The effect of nitrogen on the microstructure and mechanical properties of a cobalt base alloy was studied. The treatments were carried out for contact times of 0, 15, 30, 45 and 55 min, between the gas and the liquid metal. The treatment temperature was 1723 K at a nitrogen pressure of 0.67 atm. The

Hydrogenation properties and structure o

Hydrogenation properties and structure of Ti–Cr alloy prepared by mechanical grinding

✍ N. Takeichi; H. Senoh; H.T. Takeshita; T. Oishi; H. Tanaka; T. Kiyobayashi; N. K 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 199 KB