✦ LIBER ✦

Microstructure and Mechanical Properties of In Situ Produced TiC/TiB2/MoSi2 Composites

✍ Scribed by Jianlin Li; Guangzhao Bai; Dongliang Jiang; Shouhong Tan

Book ID: 109256211
Publisher: John Wiley and Sons
Year: 2005
Tongue: English
Weight: 495 KB
Volume: 88
Category: Article
ISSN: 0002-7820
DOI: 10.1111/j.1551-2916.2005.00279.x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Preparation and properties of MoSi2 comp

Preparation and properties of MoSi2 composites reinforced by TiC, TiCN, and TiB2

✍ Junhu Meng; Jinjun Lu; Jingbo Wang; Shengrong Yang 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 798 KB

Molybdenum disilicide (MoSi 2 )-based composites reinforced by TiC, TiCN, and TiB 2 were fabricated by hot-pressing. The microstructures, the mechanical properties at room temperature and the tribological properties of these materials were characterized. MoSi 2 -based composites reinforced by TiC, T

Tribological properties of TiB2 and TiB2

Tribological properties of TiB2 and TiB2–MoSi2 ceramic composites

✍ T.S.R.Ch. Murthy; Bikramjit Basu; Amitesh Srivastava; R. Balasubramaniam; A.K. S 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 610 KB

Tensile properties and microstructures o

Tensile properties and microstructures of NiAl-20TiB2 and NiAl-20TiC in situ composites

✍ J.T Guo; D.T Jiang; Z.P Xing; G.S Li 📂 Article 📅 1997 🏛 Elsevier Science ⚖ 538 KB

A hot-pressing aided exothermic synthesis HPES technique was developed to fabricate NiAl matrix composites reinforced with TiB and TiC particles which were in situ reaction synthesized from 2 elemental powders. These particles were uniformly dispersed in the matrix. The resulting products were hot i

Microstructure and mechanical properties

Microstructure and mechanical properties of ZrB2–MoSi2 ceramic composites produced by different sintering techniques

✍ Diletta Sciti; Frédéric Monteverde; Stefano Guicciardi; Giuseppe Pezzotti; Alida 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 344 KB

Ceramic composites in the system ZrB2–(15–20vol% MoSi2) were produced by different densification techniques: pressureless sintering, hot-pressing and spark plasma sintering. Regardless of the sintering technique, the addition of 15–20vol% MoSi2 was beneficial for the densification of these composite

Microstructure and mechanical properties

Microstructure and mechanical properties of TiB2-Al2O3composites

✍ Guoxi Liu; Dongming Yan; Jinyong Zhang 📂 Article 📅 2011 🏛 Wuhan University of Technology 🌐 English ⚖ 389 KB

Processing and mechanical properties of

Processing and mechanical properties of ZrO2–TiB2 composites

✍ Bikramjit Basu; Jef Vleugels; Omer Van der Biest 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 485 KB