✦ LIBER ✦

Microstructural evolution during the formation of Ti3AlC2

✍ Scribed by Michiyuki Yoshida; Yasuhiro Hoshiyama; Junji Ommyoji; Akira Yamaguchi

Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 531 KB
Volume: 173
Category: Article
ISSN: 0921-5107
DOI: 10.1016/j.mseb.2010.01.006

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

First-order Raman scattering of the MAX

First-order Raman scattering of the MAX phases: Ti2AlN, Ti2AlC0.5N0.5, Ti2AlC, (Ti0.5V0.5)2AlC, V2AlC, Ti3AlC2, and Ti3GeC2

✍ Volker Presser; Michael Naguib; Laurent Chaput; Atsushi Togo; Gilles Hug; Michel 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 283 KB

Effect of initial microstructure on the

Effect of initial microstructure on the microstructural evolution and mechanical properties of Ti during cold rolling

✍ V.V. Stolyarov; Y.T. Zhu; G.I. Raab; A.I. Zharikov; R.Z. Valiev 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 418 KB

Microstructural evolution of nickel-rich

Microstructural evolution of nickel-rich Ni-Al-Ti alloys during aging treatments: The effect of composition

✍ N Njah; O Dimitrov 📂 Article 📅 1989 🏛 Elsevier Science ⚖ 930 KB

Evolution of microstructure and hardenin

Evolution of microstructure and hardening, and the role of Al3Ti coarsening, during extended thermal treatment in mechanically alloyed Al-Ti-O based materials

✍ I.C. Barlow; H. Jones; W.M. Rainforth 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 961 KB

Microstructural evolution of 304 stainle

Microstructural evolution of 304 stainless steel during mechanical milling

✍ H. Huang; J. Ding; P.G. McCormick 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 604 KB

The microstructural development in 304 stainless steel powder during mechanical milling has been investigated. X-ray diffraction, transmission electron microscopy (TEM) and saturation magnetisation measurements show that a strain-induced martensitic transformation occurs during milling. Measurements

Microstructural observation of formation

Microstructural observation of formation and grains alignment of Bi (2 2 2 3) phase during solidification and sintering

✍ A. Nagata; X.Y. Lu; K. Sugawara; S. Kamada 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 166 KB

Needle-like (Cu~-x Srx)CuOy solidified around 930°C and plate-like Bi(2201) formed by peritectic reaction of (Cu~-xSrx)CuO, and liquid phase below 890"C. Solidification process finished at about 865~3. Bi ( 2212) was formed by a solid state reaction of Bi ( 2201) and (Cu l-xSrx) CuOy. Bi (2223) appe