<p><span>This textbook is aimed at graduate and upper undergraduate students studying materials science and metallurgy. It comprehensively covers the topic of microstructural characterization and includes an emphasis on Fourier analysis and Fourier transformation, electron diffraction, electromagnet
Microstructural Characterisation Techniques
โ Scribed by Gunturi Venkata Sitarama Sastry
- Publisher
- Springer
- Year
- 2022
- Tongue
- English
- Leaves
- 254
- Series
- Indian Institute of Metals Series
- Category
- Library
No coin nor oath required. For personal study only.
โฆ Synopsis
This textbook is aimed at graduate and upper undergraduate students studying materials science and metallurgy. It comprehensively covers the topic of microstructural characterization and includes an emphasis on Fourier analysis and Fourier transformation, electron diffraction, electromagnetic waves and electron waves, lens parameters, transmission electron microscopy, optical microscopy and scanning electron microscopy. The author has included pedagogical features such as end-of-chapter exercises and worked examples with varying degrees of difficulty to augment learning and self-testing. This book will be a useful guide for upper undergraduate and graduate students along with researchers and professionals working in the field of microstructural characterization.
โฆ Table of Contents
Series Editorโs Preface
About theย Indian Institute ofย Metals
Genesis andย History ofย theย Series
Current Series Information
Foreword
Acknowledgements
Contents
About theย Author
1 Introduction
1.1 Requirement to `See'
1.2 The New Definition
1.3 Scope of the Book
2 Electromagnetic Waves and Electron Waves
2.1 Interference and Diffraction
2.2 Charged Particle-Wave Optics
2.3 Electrostatic and Electromagnetic Lenses
2.3.1 Electrostatic Lenses
2.3.2 Electromagnetic Lenses
2.3.3 The Lens Parameters
3 Fourier Analysis and Fourier Transformation
3.1 Fourier Analysis
3.1.1 Fourier Coefficients
3.1.2 Exponential Series
3.2 Fourier Transforms
4 Transmission Electron Microscope
4.1 Constituents of a Modern TEM
4.2 Illumination System
4.2.1 Electron Gun
4.2.2 Condenser Lens System
4.3 Image Forming System
4.4 Viewing and Recording
4.4.1 Digital Image Recording
5 Electron Diffraction
5.1 Laue Diffraction
5.2 Bragg's Law
5.2.1 Reciprocal Lattice
5.2.2 Stereographic Projection
5.3 Representation of Electron Diffraction in Reciprocal Space
5.4 Intensity of a Diffracted Beam From a Thin Crystal Under Kinematical Conditions
5.5 Indexing of Electron Diffraction Patterns
5.5.1 Ratio Method
5.5.2 Kikuchi Lines and Kikuchi Patterns
5.6 Determination of Orientation Relationships
5.6.1 Matrix-Twin Orientation Relation
5.6.2 Precipitate-Matrix Relation
5.7 Effect of Ordering of the Crystal
5.8 When the Material is Having Amorphous Structure
5.9 Convergent Beam Electron Diffraction
5.9.1 The Instrument
5.9.2 The Procedure
5.9.3 Measurements
5.9.4 Zone Axis Pattern and Zero Disc Patterns
5.9.5 Defect Analysis
5.10 Other Diffraction Techniques
5.10.1 Precession Electron Diffraction
6 Optical Microscopy
6.1 Limit of Resolution and Resolving Power
6.1.1 Abbe's Theory of Image Formation
6.1.2 Rayleigh Criterion
6.1.3 Possibilities of Extending Resolution Limits
6.2 Magnification, Depth of Focus and Depth of Field
6.3 Lens Aberrations
6.3.1 Spherical Aberration
6.3.2 Chromatic Aberration
6.3.3 Astigmatism and Coma
6.3.4 Curvature of Image Plane
6.3.5 Distortions
6.4 A Compound Metallurgical Microscope
6.4.1 Objectives and Oculars
6.5 Polarised Light Microscopy
6.5.1 Birefringence
6.5.2 The Microscope
6.6 Interference Microscopy
6.6.1 Interference-Fringe Microscopy
6.6.2 Interference Contrast Microscopy or DIC Microscopy
7 Transmission Electron Microscopy
7.1 Importance of Contrast
7.2 Diffraction Contrast
7.2.1 Thickness Fringes
7.2.2 Bend Contours
7.2.3 Contrast from Crystals with Imperfections
7.2.4 Contrast from Epitaxial Layers
7.2.5 Contrast from Polymeric Materials and Polymer-Based Composites
7.3 Phase Contrast
7.3.1 Requirements on the Part of Microscope
7.3.2 Image Formation
7.4 Differential Energy Contrast
7.5 Contrast Mechanisms in STEM
7.6 Magnetic-Moment Contrast
7.6.1 Lorentz Microscopy
7.7 Electron Holography Contrast
7.7.1 In-Line Holography
7.7.2 Off-Axis Holography
8 Lensless Electron Microscopy
8.1 Scanning Electron Microscope
8.1.1 A Schematic Layout of the Microscope
8.1.2 Types of Signals Generated by the Specimen
8.1.3 Principal Modes of Operation
8.1.4 Resolution
8.1.5 Contrast
8.1.6 Depth of Field
8.1.7 Enhancing the Resolution and Other Capabilities of SEM
8.1.8 Electron Backscattered Diffraction
Appendix A Stereographic Projection
A.1 Projection Method
A.1.1 Important Properties
A.1.2 Construction of Wulff Net with Desired Diameter and Intervals of Lines
A.1.2.1 Non-orthogonal crystal systems
A.1.3 Applications
Appendix B Basic Crystallography
B.1 Unit Cell and Primitive Cell
B.2 Crystal Systems and Bravais Lattices
Appendix C Cosine Formulae
C.1 Table of Cosines
Appendix D Illumination Systems for Optical Microscopes
D.1 Important Parameters
D.1.1 Mercury Arc Lamps
D.1.2 Metal Halide Lamps
D.1.3 Light Emitting Diodes
Appendix References
๐ SIMILAR VOLUMES
In the past 50 years, great progress has been made in developing artificial fiber-reinforced composite materials, generally using filaments with microscopic diameters. An array of reinforcement forms can be used in commercial applications - with the microstructure being a critical factor in realizin
Microstructural characterization is usually achieved by allowing some form of probe to interact with a carefully prepared specimen. The most commonly used probes are visible light, X-ray radiation, a high-energy electron beam, or a sharp, flexible needle. These four types of probe form the basis for
Microstructural Characterization of Materials David Brandon and Wayne D. Kaplan Technion, Israel Institute of Technology Israel The internal microstructure and the microstructural features of materials are of key importance when analysing a material for a given engineering application. In specifying
<p>During recent years, people involved in developing new metals and materials for use in some of the rather extreme conditions of stress, temperature, and environment have relied heavily on the microstructural condition of their materials. In fact, many of the newer materials, such as dispersion-st
<p>In recent years microstructural analysis has been a rapidly changing field of scienยญ tific endeavor. No longer are the efforts of the microstructural analysts (sometimes referred to as metallographers, materialographers, ceramographers, and similar desigยญ nations) limited to the tasks of polishin