Microstrip stepped impedance resonator bandpass filter with an extended optimal rejection bandwidth
✍ Scribed by Kuo, J.-T.; Shih, E.
- Book ID
- 114659803
- Publisher
- IEEE
- Year
- 2003
- Tongue
- English
- Weight
- 505 KB
- Volume
- 51
- Category
- Article
- ISSN
- 0018-9480
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract In this paper, a wide rejection bandwidth bandpass filter with stepped‐impedance hairpin (SIH) resonator and interlaced coupled‐line was proposed. With the former, its elliptic‐function low‐pass response was adopted to steepen the upper roll off characteristic and flatten the rejection
## Abstract This paper describes the microstrip stepped‐impedance resonator (SIR) bandpass filter with an over‐coupling structure for the suppression of spurious response at twice the center frequency (2f~__0__~). In addition, the tapped I/O is used in the filter to create the extra transmission ze
## Abstract This article presents a compact microstrip bandpass filter (BPF) design for the 2.45 and 5.25 GHz wireless local‐area network (WLAN) applications. U‐shaped quarter‐wavelength stepped‐impedance resonators (λ/4 SIRs), for which the circuit size is small and the second resonant frequency c
## Abstract In this letter, a novel microstrip bandpass filter (BPF) with half asymmetric resonators is presented.With Filter structure and capacitively loaded coupling, a wide bandwidth with sufficient rejection level can be achieved easily. The electromagnetic simulation is used, and the prototyp
## Abstract A miniaturized microstrip cross‐coupling bandpass filter using new stepped impedance resonators (SIRs) with simultaneous suppression of the 2nd harmonic passband response is presented. Four improved and miniaturized SIRs constitute the compact filter, which exhibits a sharp transition b