𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Micromechanics model based on the nanostructure of PFSA membranes

✍ Scribed by Ahmet Kusoglu; Michael H. Santare; Anette M. Karlsson; Simon Cleghorn; William B. Johnson

Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
715 KB
Volume
46
Category
Article
ISSN
0887-6266

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

On the resolution dependence of micromec
On the resolution dependence of micromechanical contact models
✍ Giorgio Zavarise; Mauro Borri-Brunetto; Marco Paggi πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 709 KB

In this study we deal with the problem of normal contact between rough surfaces. A power spectral density of the asperity heights which obeys a power-law within a given range of wavelengths has been considered. Hence, the resolution dependence of the statistical parameters computed according to the

On the design of dental resin-based comp
On the design of dental resin-based composites: A micromechanical approach
✍ Bill Kahler; Andrei Kotousov; Michael V. Swain πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 308 KB

Adhesive resin-based restorative materials have the potential to considerably strengthen teeth and offer more economically viable alternatives to traditional materials such as gold, amalgam or ceramics. Other advantages are direct and immediate placement and the elimination of the use of mercury. Ho

Micromechanically based formulation of t
Micromechanically based formulation of the cooperative model for the yield behavior of semi-crystalline polymers
✍ O. Gueguen; J. Richeton; S. Ahzi; A. Makradi πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 198 KB

In this paper, a micromechanically based formulation of the cooperative model is proposed for the yield behavior of semi-crystalline polymers. The semi-crystalline polymer is considered as a two-phase material where the yield processes involved in the amorphous phase and in the crystalline phase are

A three-dimensional micromechanics model
A three-dimensional micromechanics model for the damage of brittle materials based on the growth and unilateral effect of elliptic microcracks
✍ Ren Zhongjun; Peng Xianghe; Wan Ling πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier Science 🌐 English βš– 745 KB

Based on the analysis of a representative elliptic microcrack embedded in a RVE, the additional compliance tensor induced by an embedded opening/closed microcrack is derived, and that corresponding to the kinked growth of a closed elliptic microcrack is also derived by making use of its approximatel