✦ LIBER ✦

Microindentation fracture behavior of laser surface modified alumina ceramic

✍ Scribed by Sandip P. Harimkar; Narendra B. Dahotre

Book ID: 113897083
Publisher: Elsevier Science
Year: 2008
Tongue: English
Weight: 514 KB
Volume: 58
Category: Article
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2007.11.013

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microindentation fracture behavior of su

Microindentation fracture behavior of surface modified alumina ceramic using glass infiltration

✍ A. Balakrishnan; B.B. Panigrahi; M.C. Chu; T.N. Kim; S.J. Cho 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 589 KB

This study investigates the effect of a low expansion glass (Mg 3 Al 2 Si 6 O 18 ) treatment on the surface fracture toughness of sintered alumina. The surface fracture toughness was determined by direct indentation method (Vickers indentations), carried out at different loads ranging from 9.8 to 19

Characterization of microstructure in la

Characterization of microstructure in laser surface modified alumina ceramic

✍ Sandip P. Harimkar; Narendra B. Dahotre 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 784 KB

Multilevel residual stress evaluation in

Multilevel residual stress evaluation in laser surface modified alumina ceramic

✍ A.N. Samant; N.B. Dahotre 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 362 KB

Mechanisms of Improvement of Fracture St

Mechanisms of Improvement of Fracture Strength in Laser-Surface-Modified Ceramics

✍ Kasichainula Jagannadham; Jagdish Narayan 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 744 KB

Delayed fracture of alumina ceramics wit

Delayed fracture of alumina ceramics with compressive surface layers

✍ H.P. Kirchner; R.E. Walker 📂 Article 📅 1971 🏛 Elsevier Science ⚖ 772 KB

Laser assisted densification of surface

Laser assisted densification of surface porosity in structural alumina ceramic

✍ Harimkar, S. ;Dahotre, N. B. 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 635 KB

## Abstract Alumina ceramics are extensively used in structural components due to excellent thermal and mechanical properties. The effective utilization of alumina ceramic in these applications necessitates the minimization of inherent processing defects such as porosity. Laser processing can be ef