✦ LIBER ✦

Microhardness testing of plastics using ball and conical indenters

✍ Scribed by R.J. Crawford; G. Stephens

Publisher: Elsevier Science
Year: 1985
Tongue: English
Weight: 872 KB
Volume: 5
Category: Article
ISSN: 0142-9418
DOI: 10.1016/0142-9418(85)90015-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Ball indentation tests and the grain str

Ball indentation tests and the grain structure of lead

✍ T.D. Dudderar; J. Duffy 📂 Article 📅 1967 🏛 Elsevier Science 🌐 English ⚖ 787 KB

Extraction of stress–strain curves of el

Extraction of stress–strain curves of elastic–viscoplastic solids using conical/pyramidal indentation testing with application to polymers

✍ G. Kermouche; J.L. Loubet; J.M. Bergheau 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 861 KB

The increasing use of polymeric materials as thin coatings requires appropriate mechanical characterization methods at micro and nano-scale taking account of time-dependent effects. In this paper, a nanoindentation method developed initially for elastoplastic solids is extended to elasto-viscoplasti

Determination of elastic and plastic mat

Determination of elastic and plastic material properties using indentation: Development of method and application to a thin surface coating

✍ L.M. Farrissey; P.E. McHugh 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 597 KB

Study of transfer process of liquid into

Study of transfer process of liquid into and plasticizer out of plasticized PVC by using short tests

✍ J. L. Taverdet; J. M. Vergnaud 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 446 KB

Characterization of flexural and thermo-

Characterization of flexural and thermo-mechanical behavior of plastic ball grid package assembly using moiré interferometry

✍ Jinwon Joo; Seungmin Cho; Bongtae Han 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 925 KB

Experimental and computational study on

Experimental and computational study on the load-jump tests of Al–Mg solid–solution alloy using instrumented indentation technique

✍ H. Takagi; M. Dao; M. Fujiwara 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 250 KB

Constant-load tests and load-jump tests were carried out using a microindenter in Al-5.3 mol% Mg solid-solution alloy. When the representative stress σ beneath the indenter decreases to a critical stress level, σc ∼ = 61 MPa, during indentation creep at 573 K, the stress exponent n for creep changes