✦ LIBER ✦

Microhardness, Microstructure and Electrochemical Efficiency of an Al (Zn/xMg) Alloy after Thermal Treatment

✍ Scribed by Socorro Valdez; M. Suarez; O.A. Fregoso; J.A. Juárez-Islas

Book ID: 117695216
Publisher: Allerton Press Inc
Year: 2012
Tongue: English
Weight: 888 KB
Volume: 28
Category: Article
ISSN: 1005-0302
DOI: 10.1016/s1005-0302(12)60050-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructure evolution and thermal exp

Microstructure evolution and thermal expansion of Cu-Zn alloy after high pressure heat treatment

✍ Yan CHEN; Lin LIU; Yue-hui WANG; Jian-hua LIU; Rui-jun ZHANG 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 621 KB

Development of the microhardness of an a

Development of the microhardness of an al-2.0 at.% zn-1.3 at.% mg alloy with additions of technical impurities during a two-step ageing treatment (ii)

✍ R. Gerlach; H. Löffler 📂 Article 📅 1982 🏛 John Wiley and Sons 🌐 English ⚖ 427 KB 👁 1 views

Microstructure and mechanical properties

Microstructure and mechanical properties of spray-deposited Al–10.8Zn–2.8Mg–1.9Cu alloy after two-step aging treatment at 110 and 150 °C

✍ Feng Wang; Baiqing Xiong; Yongan Zhang; Baohong Zhu; Hongwei Liu; Zixing Wang; X 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 591 KB

Characterization of the mechanical prope

Characterization of the mechanical properties changes in an Al–Zn–Mg alloy after a two-step ageing treatment at 70° and 135 °C

✍ Mahmoud Chemingui; Mohamed Khitouni; Karol Jozwiak; Gérard Mesmacque; Abdelwaheb 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 677 KB

Fine-scale precipitation of the g 0 phase and its precursors are essential for the mechanical properties of Al-4.6 wt%Zn-1.2 wt%Mg alloy. This paper deals with an investigation of precipitation in an industrial Al-Zn-Mg alloy at various stages of a conventional two-step ageing treatment at 70 °C and

Microstructure and mechanical properties

Microstructure and mechanical properties of forged Al-7.1Zn-1.1Mg-1.6Cu-0.14Zr alloy after two-step ageing treatment at 120 and 170°C

✍ Shaohua Wang; Xingguo Zhang; Shoujie Yang; Canfeng Fang; Hai Hao; Shenglong Dai 📂 Article 📅 2010 🏛 Nonferrous Metals Society of China 🌐 English ⚖ 907 KB

On the influence of impurity additions a

On the influence of impurity additions and quenching temperature on the course of the microhardness (HV) during a two-step ageing treatment of an Al-2.0 at.%Zn-1.3 at.%Mg Alloy

✍ Dipl. Phys. R. Gerlach; Prof. Dr. habil. H. Löffler 📂 Article 📅 1983 🏛 John Wiley and Sons 🌐 English ⚖ 375 KB 👁 1 views