✦ LIBER ✦

Methods of testing strain resistors on the conditions of operating in large-load balances

✍ Scribed by A. A. Koller; I. G. Tsibin; V. Ya. Cherepanov

Book ID: 106465786
Publisher: Springer US
Year: 2009
Tongue: English
Weight: 214 KB
Volume: 52
Category: Article
ISSN: 0543-1972
DOI: 10.1007/s11018-010-9411-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

EFFECTS OF SAMPLE GEOMETRY AND LOADING C

EFFECTS OF SAMPLE GEOMETRY AND LOADING CONDITIONS ON THE STRAIN DISTRIBUTION WITHIN SCLERAL SAMPLES IN BIAXIAL TESTING

✍ Armin Eilaghi; John G. Flanagan; G. Wayne Brodland; C. Ross Ethier 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 146 KB

The influence of loading conditions on t

The influence of loading conditions on the life-times in fatigue testing of bone cements

✍ U. Soltész 📂 Article 📅 1994 🏛 Springer 🌐 English ⚖ 197 KB

Effect of metal/acid balance in Pt-loade

Effect of metal/acid balance in Pt-loaded large pore zeolites on the hydroisomerization ofn-Hexane andn-heptane

✍ Jeong-Kyu Lee; Hyun-Ku Rhee 📂 Article 📅 1997 🏛 Springer US 🌐 English ⚖ 983 KB

Experimental and computing method for co

Experimental and computing method for constructing true deformation diagrams at large strains on the basis of tests for hardness

✍ V. G. Bazhenov; S. V. Zefirov; S. L. Osetrov 📂 Article 📅 2006 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 215 KB

On the feasibility of optical fibre sens

On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions

✍ I. De Baere; G. Luyckx; E. Voet; W. Van Paepegem; J. Degrieck 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 766 KB

The influence of support conditions in t

The influence of support conditions in the loading fixture on failure mechanisms in the push-out test: A finite element study

✍ Dr. T. P. Harrigan; J. Kareh; W. H. Harris 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 647 KB

## Abstract The usefulness of the push‐out test as an indicator of interface strength was evaluated using finite element models of intact and partially failed cylindrical push‐out specimens loaded against a rigid annular support. The irregular stress distributions that were found in intact specimen