𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Method of loading a specimen in testing for fracture toughness

✍ Scribed by G. I. Shapiro; V. I. Yagust

Publisher
Springer
Year
1977
Tongue
English
Weight
141 KB
Volume
12
Category
Article
ISSN
1573-885X

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

A compact C-shape specimen for fracture
A compact C-shape specimen for fracture toughness testing
✍ J.C. Ritter; T.W. Rea πŸ“‚ Article πŸ“… 1977 πŸ› Elsevier Science 🌐 English βš– 333 KB

hharaet--A compact form of C-shape fracture toughness test specimen is investigated. The specimen can be taken from thick-walled cylinders with greater material economy than the proposed ASTM C-shape, but is more difficult to manufacture. The K-calibration is identical with the ASTM compact tension

Fracture toughness (KQ) testing with a m
Fracture toughness (KQ) testing with a mini-compact tension (CT) specimen
✍ C. Y-C. Lee; W. B. Jones Jr. πŸ“‚ Article πŸ“… 1982 πŸ› Society for Plastic Engineers 🌐 English βš– 774 KB

## Abstract A testing method using the Rheometrics Mechanical Spectrometer as the loading instrument to measure the fracture toughness __K__~__Q__~, which is related to a specific sample geometry and dimensions (half‐inch compact tension) is reported. The small sample size requirement makes it attr

A method for testing interlaminar dynami
A method for testing interlaminar dynamic fracture toughness of polymeric composites
✍ C.T Sun; C Han πŸ“‚ Article πŸ“… 2004 πŸ› Elsevier Science 🌐 English βš– 305 KB

Static and dynamic Mode I delamination fracture in two polymeric fiber composites was studied using a WIF test method. The dynamic test was conducted on a Split Hopkinson Pressure Bar apparatus. Crack speeds up to 1000 m/s were achieved. Dynamic fracture and crack propagation were modeled by the fin

A comparison of various fracture toughne
A comparison of various fracture toughness testing methods
✍ Susil K. Putatunda πŸ“‚ Article πŸ“… 1986 πŸ› Elsevier Science 🌐 English βš– 971 KB

comparative study of the various fracture toughness test methods and estimation procedures has been carried out. The fracture toughness of AISI 4340 steel has been determined by several methods, i.e. (i) JR curve, (ii) 6, curve, (iii) K, curve, (iv) stretch zone size measurements (v) non-linear ener