✦ LIBER ✦

Method for producing a joint

Publisher: Elsevier Science
Year: 2009
Tongue: English
Weight: 102 KB
Volume: 2009
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(09)70525-2

No coin nor oath required. For personal study only.

✦ Synopsis

inner diameter (d1, 7, 9) of the seal (2) is larger than all of the national and/or international sealing and working standard dimensions for the inner diameter for flat gaskets, known to the public before 27 November 2007 or before 27 November 2008, in relation to the pre-defined outer diameter (d2, 2a, 11). The purpose is to ensure that the gasket does not overlap the flow passage when it is not correctly centralised.

📜 SIMILAR VOLUMES

Method of producing resin joint boot

📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 33 KB

Surface seal and method for producing se

Surface seal and method for producing sealed joints

📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 90 KB

An oil seal is described that has a pair of concentric seal lips contained in a rotating housing and a stationary flange between them. The inner lip does not contact the stationary flange when the shaft is stationary but moves to close the gap, presumably due to centrifugal force. A wide selection o

Method for producing a multilayer seal

📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 192 KB

Method for producing a honeycomb seal

📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 295 KB

4834112 Device for producing incremental

4834112 Device for producing incremental joint movement in a patient

✍ James Machek; Edward Rhinehart 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 102 KB

A new method for producing proteic coati

A new method for producing proteic coatings

✍ Domurado, D. ;Thomas, D. ;Broun, G. 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 107 KB