𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Metallurgical study of SiCNiCr plasma-sprayed coatings

✍ Scribed by F. Alonso; I. Fagoaga; P. Oregui; J.L. Viviente

Publisher
Elsevier Science
Year
1992
Tongue
English
Weight
541 KB
Volume
11
Category
Article
ISSN
0921-5107

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructure and adhesion of Cr3C2–NiC
Microstructure and adhesion of Cr3C2–NiCr vacuum plasma sprayed coatings
✍ Z. Marcano; J. Lesage; D. Chicot; G. Mesmacque; E.S. Puchi-Cabrera; M.H. Staia 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 526 KB

Vacuum plasma spraying (VPS) was used to spray a Cr 3 C 2 -NiCr coating of ∼150, 300 and 450 μm in thickness onto a plain carbon steel substrate, employing a commercially available Cr20Ni9.5C powder. The splat microstructures observed in the coating were found to consist of a NiCr matrix with a pred

Plasma sprayed coatings of hydroxylapati
Plasma sprayed coatings of hydroxylapatite
✍ De Groot, K. ;Geesink, R. ;Klein, C. P. A. T. ;Serekian, P. 📂 Article 📅 1987 🏛 John Wiley and Sons 🌐 English ⚖ 390 KB
Plasma sprayed coatings of hydroxylapati
Plasma sprayed coatings of hydroxylapatite
✍ De Groot, K. ;Geesink, R. ;Klein, C. P. A. T. ;Serekian, P. 📂 Article 📅 1987 🏛 John Wiley and Sons 🌐 English ⚖ 390 KB

The technique of plasma spraying has been applied to deposite a thin, dense layer of hydroxylapatite onto a titanium substrate. Bond strength of such apatite coatings with the substrate have been measured, as well as the (absence of) influence of the coating process on fatigue properties of the subs