✦ LIBER ✦

Metallic Biomaterials

✍ Scribed by V. Biehl; J. Breme

Publisher: John Wiley and Sons
Year: 2001
Tongue: English
Weight: 99 KB
Volume: 32
Category: Article
ISSN: 0933-5137
DOI: 10.1002/1521-4052(200102)32:2<137::aid-mawe137>3.0.co;2-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Comparative study of some metallic bioma

Comparative study of some metallic biomaterials used as implants

✍ N. A. Al-Mobarak 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 267 KB

The electrochemical behavior of two Ti alloys (TA and TAV) and two grades of stainless steels (SS 1 and SS 2 ), commonly used as biomedical implant materials, particularly for orthopedic and osteosynthesis applications, was investigated in Hank's solution at 37 C and different pH. The aim was to dis

Degradable metallic biomaterials: Design

Degradable metallic biomaterials: Design and development of Fe–Mn alloys for stents

✍ Hendra Hermawan; Dominique Dubé; Diego Mantovani 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 460 KB

## Abstract Designing materials having suitable mechanical properties and targeted degradation behavior is the key for the development of biodegradable materials for medical applications, including stents. A series of Fe–Mn alloys was developed with the objective to obtain mechanical properties sim

Glow discharge plasma treatment for surf

Glow discharge plasma treatment for surface cleaning and modification of metallic biomaterials

✍ Aronsson, B.-O. ;Lausmaa, J. ;Kasemo, B. 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 984 KB

Comparative study of the corrosion behav

Comparative study of the corrosion behavior of MA-956 and conventional metallic biomaterials

✍ Escudero, M. L. ;L�pez, M. F. ;Ruiz, J. ;Garc�a-Alonso, M. C. ;Canahua, H. 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 422 KB 👁 2 views

In this work the corrosion behavior of a new biomaterial, the MA-956 superalloy, immersed in Hank's solution is evaluated. A comparison with conventional metallic alloys used as articular implants is established. To determine the corrosion behavior we employed electrochemical methods: evaluation of

Assessing acute platelet adhesion on opa

Assessing acute platelet adhesion on opaque metallic and polymeric biomaterials with fiber optic microscopy

✍ Schaub, Richard D. ;Kameneva, Marina V. ;Borovetz, Harvey S. ;Wagner, William R. 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 517 KB

The degree of platelet adhesion and subsequent thrombus formation is an important measure of biocompatibility for cardiovascular biomaterials. Traditional methods of quantifying platelet adhesion often are limited by the need for direct optical access, limited spatial resolution, or the lack of temp

Dental biomaterials

✍ Rekow, E. Dianne ;Thompson, Van P. 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 21 KB