✦ LIBER ✦

Metal seal-ring and conduit device

Book ID: 114372751
Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 380 KB
Volume: 2011
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(11)70305-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Radial seal ring for a puncture device

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 236 KB

or more of what are termed stress-control grooves on its surface. These grooves enable material to deform laterally and increase the contact stress between seal and counter-surface at the corners of the groove. The design is intended to preserve sealing integrity over wide temperature excursions exp

Floating ring seal incorporating frictio

Floating ring seal incorporating friction monitoring device

📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 466 KB

the groove prior to assembly. As the component is assembled the seal is compressed radially inwards against the external surface of the tubing. A pressure port is provided -from the high pressure side to the outside diameter of the seal -for additional 'energisation'.

Highly resilient metal O-ring seal

📂 Article 📅 2014 🏛 Elsevier Science 🌐 English ⚖ 191 KB

Metallic sealing rings prevent contamina

Metallic sealing rings prevent contamination

📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 107 KB

Hollow metal O-ring seals

✍ V. B. Protopopov 📂 Article 📅 1965 🏛 Springer 🌐 English ⚖ 291 KB

Sealing device with metal joint

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 683 KB

This patent describes a metal-to-metal seal that is intended to create a high contact stress the seal ring. The flanges each have a triangular section recess. When the flanges are clamped together the seal is forced into the wedge shaped groove creating a high contact stress on the pressure side of