✦ LIBER ✦

Mechanisms for improved XeF laser performance at elevated temperatures

✍ Scribed by Burde, D. H. ;Yang, Tien Tsai ;Harris, D. G. ;Pugh, L. A. ;Tillotson, J. H. ;Turner, Charles E. ;Merry, George A.

Book ID: 115335077
Publisher: The Optical Society
Year: 1987
Tongue: English
Weight: 505 KB
Volume: 26
Category: Article
ISSN: 1559-128X
DOI: 10.1364/AO.26.002539

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Improved apparatus and procedures for is

Improved apparatus and procedures for isopiestic studies at elevated temperatures

✍ Hefter, Glenn; May, Peter M.; Marshall, Simon L.; Cornish, John; Kron, Ivan 📂 Article 📅 1997 🏛 American Institute of Physics 🌐 English ⚖ 468 KB

Failure mechanisms for stocky webs under

Failure mechanisms for stocky webs under patch loading at elevated temperatures

✍ A. Heidarpour; M.A. Bradford 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 866 KB

Ultrathin Surface Coatings for Improved

Ultrathin Surface Coatings for Improved Electrochemical Performance of Lithium Ion Battery Electrodes at Elevated Temperature

✍ Zhao, Jianqing; Wang, Ying 📂 Article 📅 2012 🏛 American Chemical Society 🌐 English ⚖ 623 KB

Combined Al- plus F-treatment of Ti-allo

Combined Al- plus F-treatment of Ti-alloys for improved behaviour at elevated temperatures

✍ A. Donchev; A. Kolitsch; M. Schütze; R. Yankov 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 German ⚖ 373 KB

## Abstract Titanium is a widely used structural material because of its low specific weight, good mechanical properties and excellent corrosion resistance at ambient temperature. As a result of increased oxidation at elevated temperatures and environmental embrittlement the maximum operation tempe

Effects of SWCNTs on mechanical and ther

Effects of SWCNTs on mechanical and thermal performance of epoxy at elevated temperatures

✍ Behnam Ashrafi, David Backman, Andrew Johnston… 📂 Article 📅 2013 🏛 Springer 🌐 English ⚖ 734 KB

Characterization and improvement of LTCC

Characterization and improvement of LTCC composite materials for application at elevated temperatures

✍ Christian Bienert; Andreas Roosen 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 686 KB

Glass-ceramic composites combine the material properties of its ceramic filler material and the ability of densification via glass assisted sintering. Especially for LTCC materials, were densification has to be achieved at temperatures below 900 • C to enable the usage of metals of improved conducti