✦ LIBER ✦

Mechanism of fatigue crack initiation and propagation in the very high cycle fatigue regime of high-strength steels

✍ Scribed by Grad, P.; Reuscher, B.; Brodyanski, A.; Kopnarski, M.; Kerscher, E.

Book ID: 119366621
Publisher: Elsevier Science
Year: 2012
Tongue: English
Weight: 854 KB
Volume: 67
Category: Article
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2012.07.049

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanism of corrosion fatigue crack pro

Mechanism of corrosion fatigue crack propagation in high strength steels

✍ Nakasa Keijiro; Takei Hideo; Itoh Hisashi 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 922 KB

The crack propagation velocity in corroGon fatigue (du/dN), were measured on the Ni-Cr-Mo steel quenched and tempered at 473 or 773 K. The steel with high sensitivity to delayed failure reveals the largest (du/dN), under square load and the smaller (da/dN), under positive saw tooth load. The frequen

Dependence of fatigue strength on inclus

Dependence of fatigue strength on inclusion size for high-strength steels in very high cycle fatigue regime

✍ Y.B. Liu; Z.G. Yang; Y.D. Li; S.M. Chen; S.X. Li; W.J. Hui; Y.Q. Weng 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 590 KB

A cumulative damage model for fatigue li

A cumulative damage model for fatigue life estimation of high-strength steels in high-cycle and very-high-cycle fatigue regimes

✍ C. SUN; J. XIE; A. ZHAO; Z. LEI; Y. HONG 📂 Article 📅 2012 🏛 John Wiley and Sons 🌐 English ⚖ 835 KB

Propagation behaviour of microstructural

Propagation behaviour of microstructural short fatigue cracks in the high-cycle fatigue regime

✍ H.-J. Christ; O. Düber; C.-P. Fritzen; H. Knobbe; P. Köster; U. Krupp; B. Künkle 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 596 KB

Prediction of the S–N curves of high-str

Prediction of the S–N curves of high-strength steels in the very high cycle fatigue regime

✍ Y.B. Liu; Y.D. Li; S.X. Li; Z.G. Yang; S.M. Chen; W.J. Hui; Y.Q. Weng 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 543 KB

Methods to predict the S-N curves of high-strength steels in the very high cycle fatigue (VHCF) regime are reviewed. At the same time, a new prediction in form of Basquin's equation is proposed based on the prediction of fatigue strengths in both high cycle fatigue regime and very high cycle fatigue

Near-threshold fatigue crack propagation

Near-threshold fatigue crack propagation of several high strength steels

✍ T.L. Mackay; B.J. Alperin; D.D. Bhatt 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 704 KB

In support of Douglas Aircraft Co. structural damage tolerance analysis, crack propagation rates were measured in humid air from lo-\* to 10m3 mm/cycle of several high strength martensitic steels at stress ratios of R = 0.1 and R = 0.5. Increasing the stress ratio was found to decrease the threshold