𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Mechanism of Consolidation of a Porous-Surfaced Ti–6Al–4V Implant Formed by Electrodischarge Compaction

✍ Scribed by W. H. Lee; D. A. Puleo

Book ID
110239204
Publisher
Springer
Year
1999
Tongue
English
Weight
57 KB
Volume
18
Category
Article
ISSN
0261-8028

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Physical characteristics of Ti-6Al-4V im
Physical characteristics of Ti-6Al-4V implants fabricated by electrodischarge compaction
✍ Okazaki, K. ;Lee, W. H. ;Kim, D. K. ;Kopczyk, R. A. 📂 Article 📅 1991 🏛 John Wiley and Sons 🌐 English ⚖ 764 KB

## Abstract Physical characteristics of a Ti‐6Al‐4V implant were evaluated following fabrication using a new electrodischarge compaction technique. Ti‐6Al‐4V atomized powders were loaded into Pyrex tubes (3.3 mm ID) and subjected to a highvoltage, high‐current‐density pulse in air for a period of l

Mechanical properties of fully porous an
Mechanical properties of fully porous and porous-surfaced Ti–6Al–4V implants fabricated by electro-discharge-sintering
✍ Y.J. Jo; C.M. Lee; H.S. Jang; N.S. Lee; J.-H. Suk; W.H. Lee 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 857 KB

Twelve different porous implant compacts were fabricated by electro-discharge-sintering (EDS) of atomized spherical Ti-6Al-4V powders using single pulses of 0.75-2.0 kJ/0.7 g-powder, from 150, 300, and 450 F capacitors. The solid core formed in the center of the compact after discharge was composed