𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Mechanical, rheological, thermal, and morphological properties of blends based on poly(propylene)/poly(propylene-co-1-octene)/poly(ethylene-co-1-octene)

✍ Scribed by Humberto Lovisi; Ana Lúcia N. Silva; Luiz Claudio de Santa Maria; Marisa C. G. Rocha; Rosário E. S. Bretas; Marcelo Farah; Fernanda M. B. Coutinho

Publisher
John Wiley and Sons
Year
2003
Tongue
English
Weight
114 KB
Volume
89
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Rheological and thermal properties of bi
Rheological and thermal properties of binary blends of polypropylene and poly(ethylene-CO-1-octene)
✍ Ana Lúcia N. Da Silva; Marisa C. G. Rocha; Fernanda M. B. Coutinho; Rosário E. S 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 171 KB 👁 2 views

Dynamic viscoelastic properties of binary blends consisting of an isotactic polypropylene (i-PP) and ethylene-1-octene copolymer (PEE) were investigated to reveal the relation between miscibility in the molten state and the morphology in the solid state. In this study, PEE with 24 wt % of 1-octene w

Blends of poly(vinyl butyral-co-vinyl al
Blends of poly(vinyl butyral-co-vinyl alcohol) and poly(ethylene terephthalate-co-ethylene naphthalate): thermal, mechanical, and morphological properties
✍ Jin-Hae Chang; Kwang Min Park; Chung-Seock Kang; Hwan-Kyeong Jeong 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 246 KB 👁 2 views

## Abstract The miscibility behavior and morphology of a series of poly(vinyl butyral‐__co__‐vinyl alcohol) (PVBA) copolymers containing 29, 52, 76, and 88 mol % of vinyl alcohol units with poly(ethylene terephthalate‐__co__‐ethylene naphthalate) (PETN) was investigated by DSC and SEM. Blends of th

Thermal and mechanical properties of ble
Thermal and mechanical properties of blends of polylactide and poly(ethylene glycol-co-propylene glycol): Influence of annealing
✍ Xianghai Ran; Zhiyuan Jia; Changyu Han; Yuming Yang; Lisong Dong 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 215 KB 👁 1 views

## Abstract Two kinds of polylactide (PLA) which was named PLA1 with L‐lactide content of 98% and PLA2 with L‐lactide content of 88% were blended with poly(ethylene glycol‐__co__‐propylene glycol) (PEPG) in a batchwise mixer and pressed into films. The effect of annealing on the thermal properties,

Compatibilization and toughening of poly
Compatibilization and toughening of poly(2,6-dimethyl-1,4-phenylene oxide)/polyamide 6 alloy with poly(ethylene 1-octene): Mechanical properties, morphology, and rheology
✍ Xiaodong Wang; Wei Feng; Hangquan Li; Riguang Jin 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 405 KB 👁 1 views

## Abstract Blends of a poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO)/polyamide 6 (PA 6) alloy toughened with a novel polyolefin elastomer poly(ethylene‐1‐octene) (POE) were prepared via melt extrusion. In order to improve the compatibilization between POE and the PPO/PA 6 alloy, POE was grafted wit