✦ LIBER ✦

Mechanical Properties ofβ–Ti-35Nb-2.5Sn Alloy Synthesized by Mechanical Alloying and Pulsed Current Activated Sintering

✍ Scribed by Abdel-Nasser Omran, Kee-Do Woo, Hyun Bom Lee

Book ID: 120925404
Publisher: The Minerals, Metals & Materials Society
Year: 2012
Tongue: English
Weight: 956 KB
Volume: 43
Category: Article
ISSN: 1073-5623
DOI: 10.1007/s11661-012-1298-y

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of Nb and Sn on the transformatio

Effect of Nb and Sn on the transformation of α-Ti to β-Ti in Ti-35 Nb−2.5Sn nanostructure alloys using mechanical alloying

✍ A. M. Omran; K. D. Woo; D. K. Kim; S. W. Kim; M. S. Moon; N. A. Barakat; D. L. Z 📂 Article 📅 2008 🏛 TechnoPress 🌐 English ⚖ 706 KB

Bulk (Ti,Cr)N consolidated by pulsed cur

Bulk (Ti,Cr)N consolidated by pulsed current activated sintering and its mechanical properties

✍ Shon, In-Jin; Suh, Chang-Yul; Lee, Sujeong; Roh, Ki-Min; Kwon, Hanjung; Cho, Sun 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 900 KB

Rapid consolidation of nanostructured Ti

Rapid consolidation of nanostructured Ti from mechanically activated Ti and TiH2by pulsed-current activated sintering, and the mechanical properties of the product

✍ Na-Ri Kim; In-Yoong Ko; Sung-Wook Cho; Wonbaek Kim; In-Jin Shon 📂 Article 📅 2010 🏛 Springer Netherlands 🌐 English ⚖ 535 KB

Evaluation of Microstructure and Mechani

Evaluation of Microstructure and Mechanical Properties of Nano-Y2O3-Dispersed Ferritic Alloy Synthesized by Mechanical Alloying and Consolidated by High-Pressure Sintering

✍ Karak, Swapan Kumar; Dutta Majumdar, J.; Witczak, Zbigniew; Lojkowski, Witold; C 📂 Article 📅 2013 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 889 KB

Microstructure and mechanical properties

Microstructure and mechanical properties of Ti-aluminides reinforced Ti matrix composites synthesized by pulsed current hot pressing

✍ K Mizuuchi; K Inoue; M Sugioka; M Itami; M Kawahara 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 898 KB

Ti-aluminides reinforced Ti matrix composites were fabricated by a pulsed current hot pressing technique, in that a combustion synthesis reaction occurs at the interface between Ti and Al foils. This reaction causes the formation of multi layered Ti-aluminides between Ti foils, and these Ti and Ti-a

Properties and densification of nanocrys

Properties and densification of nanocrystalline MoSi2–Si3N4 composite from mechanically alloyed powders by pulsed current-activated sintering

✍ In-Young Ko; Hyun-Su Kang; Jung-Mann Doh; Jin-Kook Yoon; In-Jin Shon 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 670 KB