The mechanical properties of monoliths of calcium-deficient and carbonated hydroxyapatite formed by dissolution-precipitation reactions at 38 °C have been determined. Particulate solid reactants were mixed at liquid-to-solid weight ratios of 0.11 and 0.2 and pressed into various configurations on which mechanical tests were carried out. Testing was performed on wet specimens which had been allowed to react for 8 h by which time phase-pure hydroxyapatite had formed. Calcium-deficient hydroxyapatite produced at a liquid-to-solids ratio of 0.11 exhibited a tensile strength as high as 18 MPa, an average compressive strength of 174 MPa and a Young's modulus of 6 GPa. These values were lower when a larger proportion of water (liquid-to-solid 0.2) was used in sample preparation. However, the compressive strengths of calcium-deficient hydroxyapatite prepared at 38 °C are comparable to the compressive strengths of sintered hydroxyapatite containing an equivalent total porosity. Carbonated hydroxyapatite showed mechanical properties inferior to those exhibited by calcium-deficient material. These differences appear to be related to the microstructural variations between these compositions.