𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Mechanical properties of HDPE/textile fibers composites

✍ Scribed by P.S. Souza; E.F. Rodrigues; J.M.C. Prêta; S.A.S. Goulart; D.R. Mulinari


Publisher
Elsevier
Year
2011
Tongue
English
Weight
508 KB
Volume
10
Category
Article
ISSN
1877-7058

No coin nor oath required. For personal study only.

✦ Synopsis


The use of natural fibers as reinforcement for thermoplastics has generated much interest due to the low cost, low density, high specific properties characteristics. In this work the mechanical properties of high density polyethylene/ textile fibers residues composites were studied. Effect of pretreatment with sulfuric acid on textile fibers to prepare composites was made to provide an improvement in mechanical properties of these materials. This treatment on fibers was evaluated by X-ray diffraction technique. Composites were produced in a thermokinetic mixer in the following composition: 5 and 10 wt% fibers. After mixing the samples were injection molding according to ASTM D-638 specification. Specimens were tested in tensile mode and composite fractures surface were analyzed in a scanning electron microscopy. Also was studied moisture absorption. Results showed that HDPE/ textile fibers residue presents good mechanical performance compared with high-density polyethylene.


📜 SIMILAR VOLUMES


Mechanical Properties of Coconut Fibers
✍ D.R. Mulinari; C.A.R.P. Baptista; J.V.C. Souza; H.J.C. Voorwald 📂 Article 📅 2011 🏛 Elsevier 🌐 English ⚖ 707 KB

Actually, studies about the utilization of natural fibers as reinforcement in polymeric composites are increasing due to the improvements that fibers can provide to the product. In this work, chemical modification of the coconut fibers by alkaline treatment was studied in order to use them as reinfo

Mechanical and dynamic mechanical proper
✍ J. I. Kim; S. H. Ryu; Y. W. Chang 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 310 KB 👁 1 views

Mechanical and dynamic mechanical properties of a waste rubber powderfilled high-density polyethylene (HDPE) composite are investigated. Rubber powder is surface-modified with acrylamide (AAm) using ultraviolet. Rubber powder and HDPE are extruded using a single-screw extruder and maleic anhydride-g