and for a period of 10-3-10-2 s. The cycle is then repeated at a frequency of >350/min. The method may use as the raw material methane, ethane, or other gaseous hydrocarbons mainly produced during the separation of the large fraction of light hydrocarbons from petroleum gas. The method has a yield 2
Mechanical properties of epoxy mortars with fly ash as filler
β Scribed by C. Atzeni; L. Massidda; U. Sanna
- Publisher
- Elsevier Science
- Year
- 1990
- Tongue
- English
- Weight
- 562 KB
- Volume
- 12
- Category
- Article
- ISSN
- 0958-9465
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
The effect of fineness of fly ash on mechanical properties and alkali-silica reaction resistance of cement mortar mixtures incorporating fly ash has been investigated within the scope of this study. Blaine fineness of fly ash has been increased to 907 m 2 /kg from its original 290 m 2 /kg value by a
## Abstract **Summary:** Vinylester resin matrix composites were prepared with a fly ash loading of 30, 40, 50 and 60 wt.β%. Flexural properties of the composites were investigated. It was found that the flexural strength was lowered in all the filled composites, but the flexural modulus showed a s