✦ LIBER ✦

Mechanical properties of a new and improved nickel-titanium alloy for endodontic use: an evaluation of file flexibility

✍ Scribed by Gianluca Gambarini; Roberto Gerosa; Massimo De Luca; Manish Garala; Luca Testarelli

Book ID: 116942230
Publisher: Elsevier Science
Year: 2008
Tongue: English
Weight: 160 KB
Volume: 105
Category: Article
ISSN: 1528-395X
DOI: 10.1016/j.tripleo.2008.02.017

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Dissolution of Nickel-Titanium Endodonti

Dissolution of Nickel-Titanium Endodontic Files via an Electrochemical Process: A New Concept for Future Retrieval of Fractured Files in Root Canals

✍ Fabiola Ormiga; José Antônio da Cunha Ponciano Gomes; Marcos Cesar Pimenta de Ar 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 272 KB

An in vitro study of the torsional prope

An in vitro study of the torsional properties of new and used rotary nickel-titanium files in plastic blocks

✍ Ghassan Yared; Gajanan K Kulkarni 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 496 KB

A Scanning Electron Microscopy Evaluatio

A Scanning Electron Microscopy Evaluation of Microfractures, Deformation and Separation in EndoSequence and Profile Nickel-Titanium Rotary Files Using an Extracted Molar Tooth Model

✍ Keven S. Herold; Bradford R. Johnson; Christopher S. Wenckus 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 291 KB

An investigation into the mechanical and

An investigation into the mechanical and aesthetic properties of new generation coated nickel-titanium wires in the as-received state and after clinical use

✍ Bradley, T. G.; Berzins, D. W.; Valeri, N.; Pruszynski, J.; Eliades, T.; Katsaro 📂 Article 📅 2013 🏛 Oxford University Press 🌐 English ⚖ 949 KB

Surface mechanical properties, corrosion

Surface mechanical properties, corrosion resistance, and cytocompatibility of nitrogen plasma-implanted nickel–titanium alloys: A comparative study with commonly used medical grade materials

✍ K.W.K. Yeung; R.W.Y. Poon; P.K. Chu; C.Y. Chung; X.Y. Liu; W.W. Lu; D. Chan; S.C 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 945 KB

Surface engineering techniques used for

Surface engineering techniques used for improving the mechanical and tribological properties of the Ti6A14V alloy

✍ H. Garbacz; P. Wieciński; M. Ossowski; M.G. Ortore; T. Wierzchoń; K.J. Kurzydłow 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 905 KB

The microstructure, mechanical and tribological properties of composite intermetallic layers of the Ti-Al system were investigated. The layers on the two-phase (α + β) Ti6Al4V titanium alloy were obtained using the hybrid method, which consist of two stages. First, the titanium alloy was covered wit