✦ LIBER ✦

Mechanical properties of a light-polymerizing provisional restorative material with and without reinforcement fibers

✍ Scribed by Donna L. Dixon; Michele Fincher; Larry C. Breeding; Leonard A. Mueninghoff

Book ID: 119463977
Publisher: Elsevier Science
Year: 1995
Tongue: English
Weight: 464 KB
Volume: 73
Category: Article
ISSN: 1097-6841
DOI: 10.1016/s0022-3913(05)80108-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Flexural properties of fiber-reinforced

Flexural properties of fiber-reinforced polypropylene composites with and without a transcrystalline layer

✍ David M. Dean,; Alexander A. Marchione; Ludwig Rebenfeld; Richard A. Register 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 519 KB

The flexural properties of isotactic polypropylene (PP) matrix composites reinforced with 5±30 vol% of unidirectional pitch-based carbon, polyacrylonitrile (PAN)-based carbon, e-glass or aramid fibers were measured using both static and dynamic test methods. Previous research has shown that these pi

Material transport properties of polymer

Material transport properties of polymer–gel composite-charged mosaic membrane with and without reinforcement [II]

✍ Kouichi Hirao; Akira Yamauchi; A. Mounir El Sayed 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 146 KB 👁 2 views

An experimental and analytical study of

An experimental and analytical study of a four bar mechanism with links fabricated from a fiber-reinforced composite material

✍ B.S Thompson; D Zuccaro; D Gamache; M.V Gandhi 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 597 KB

Effect of fiber modification with a nove

Effect of fiber modification with a novel compatibilizer on the mechanical properties and water absorption of hemp-fiber-reinforced unsaturated polyester composites

✍ Renhui Qiu; Xiaofeng Ren; Kaichang Li 📂 Article 📅 2012 🏛 Society for Plastic Engineers 🌐 English ⚖ 915 KB

SEM and microleakage evaluation of the m

SEM and microleakage evaluation of the marginal integrity of two types of class V restorations with or without the use of a light-curable coating material and of polishing

✍ Elisa Magni; Ling Zhang; Reinhard Hickel; Maurizio Bossù; Antonella Polimeni; Ma 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 310 KB

Optimization of Injection-Molding Proces

Optimization of Injection-Molding Process for Mechanical and Tribological Properties of Short Glass Fiber and Polytetrafluoroethylene Reinforced Polycarbonate Composites with Grey Relational Analysis: A Case Study

✍ Yang, Yung-Kuang 📂 Article 📅 2006 🏛 Taylor and Francis Group 🌐 English ⚖ 872 KB