𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Mechanical properties of a composite with a carbonized matrix

✍ Scribed by Yu. N. Rabotnov; S. A. Kolesnikov; V. S. Matitsyn; I. M. Makhmutov; V. A. Rudenko; E. I. Stepanychev

Publisher
Springer US
Year
1977
Tongue
English
Weight
609 KB
Volume
12
Category
Article
ISSN
1573-8922

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Microtexture and mechanical properties o
Microtexture and mechanical properties of carbon fibers: Relationship with the fiber-matrix adhesion in a carbon-epoxy composite
✍ M. Guigon πŸ“‚ Article πŸ“… 1991 πŸ› Society for Plastic Engineers 🌐 English βš– 878 KB

## Abstract The structure and the microtexture of carbon fibers are determined by transmission electron microscopy. All PAN‐based carbon fibers are made up of elemental microtextural units (EMU) whose microtexture governs their mechanical properties. EMU Carbon layers exhibit either their edge or t

Effects of matrix structure on mechanica
Effects of matrix structure on mechanical properties of carbon/carbon composites
✍ Seh-Min Oh; Jai-Young Lee πŸ“‚ Article πŸ“… 1988 πŸ› Elsevier Science 🌐 English βš– 707 KB

Mechanical properties of carbon/carbon composites prepared by thermal-gradient CVD technique were investigated by three-point flexural tests. The mechanical properties are strongly influenced by the matrix structure, which in turn depends on the deposition conditions employed. The lower fracture str

Processing and mechanical properties of
Processing and mechanical properties of a silicon carbide platelet/alumina matrix composite
✍ Y.-S. Chou; D.J. Green πŸ“‚ Article πŸ“… 1994 πŸ› Elsevier Science 🌐 English βš– 977 KB

Th& paper presents an integrated study of the processing and mechanical properties of a SiC platelet/alumina composites. The major goal was to investigate the potential application of plate-like particles in toughening ceramic matrices. In the processing part of the study, the microstructures were f

Fabrication and mechanical properties of
Fabrication and mechanical properties of magnesium matrix composite reinforced with Si coated carbon nanotubes
✍ Yongha Park; Kyungmox Cho; Ikmin Park; Yongho Park πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier 🌐 English βš– 616 KB

Multi-walled carbon nanotubes (MWNTs) reinforced Si coatings were prepared using solid reaction method between pure silicon powders and carbon nanotubes (CNTs). And, CNTs reinforced AZ91 metal matrix composites (MMC) were fabricated by the squeeze infiltrated method. The results obtained pave the wa