✦ LIBER ✦

Mechanical properties and morphology of polypropylene composites. III. Short glass fiber reinforced elastomer modified polypropylene

✍ Scribed by J. E. Stamhuis

Publisher: Society for Plastic Engineers
Year: 1988
Tongue: English
Weight: 690 KB
Volume: 9
Category: Article
ISSN: 0272-8397
DOI: 10.1002/pc.750090406

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical properties and morphology of

Mechanical properties and morphology of polypropylene composites. Talc-filled, elastomer-modified polypropylene

✍ J. E. Stamhuis 📂 Article 📅 1984 🏛 Society for Plastic Engineers 🌐 English ⚖ 657 KB

## Abstract The balance of impact strength and rigidity of polypropylene can be significantly improved by physical blending of the polypropylene with a talc filler and a variety of elastomer types. Unsaturated elastomers were found to be effective impact strength improvers in 70/15/15 percent PP/el

Morphology, thermal, and mechanical prop

Morphology, thermal, and mechanical properties of polypropylene/polyaniline coated short glass fiber composites

✍ Rodolfo Cruz-Silva; Jorge Romero-García; Sofía Vazquez-Rodriguez; Jose Luis Angu 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 385 KB 👁 2 views

Effects of maleated polypropylene on the

Effects of maleated polypropylene on the morphology, thermal and mechanical properties of short carbon fiber reinforced polypropylene composites

✍ Nevin Gamze Karsli; Ayse Aytac 📂 Article 📅 2011 🏛 Elsevier Science ⚖ 603 KB

Tensile deformation mechanisms of polypr

Tensile deformation mechanisms of polypropylene/elastomer blends reinforced with short glass fiber

✍ Sie Chin Tjong; Shi-Ai Xu; Robert Kwok Yiu Li; Yiu-Wing Mai 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 599 KB

Parameters regulating interfacial and me

Parameters regulating interfacial and mechanical properties of short glass fiber reinforced polypropylene

✍ Claudine Roux; Johanne Denault; Michel F. Champagne 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 381 KB 👁 2 views

The performance of thermoplastic composites is known to depend on the intrinsic properties of the two composite components, the quality of the fiber-matrix interface, and the crystalline properties of their matrix. The objective of this work is to characterize the effect of the addition of modified

Injection-molded short hemp fiber/glass

Injection-molded short hemp fiber/glass fiber-reinforced polypropylene hybrid composites—Mechanical, water absorption and thermal properties

✍ Suhara Panthapulakkal; Mohini Sain 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 643 KB