✦ LIBER ✦

Mechanical properties and lubricating action of polymer antifriction coatings with and without fillers

✍ Scribed by G. I. Fuks; Z. A. Kuteinikova

Publisher: Springer
Year: 1972
Tongue: English
Weight: 426 KB
Volume: 4
Category: Article
ISSN: 1573-885X
DOI: 10.1007/bf00721674

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical properties and lubricating ac

Mechanical properties and lubricating action of polymer antifriction coatings with and without fillers : G. I. Fuks and Z. A. Kutunikova, Soviet Mater. Sci., 4 (6) (1968) 502–506; 4 figs., 5 tables, 3 refs. (Transl. by Consultants Bureau of Fiz. Khim. Mekhan. Mater., 4 (6) (1968) 685–690.)

📂 Article 📅 1972 🏛 Elsevier Science 🌐 English ⚖ 94 KB

The range of rational application of pol

The range of rational application of polymers as antifriction materials and the mechanism of their self-lubricating action

✍ G. A. Gorokhovskii; G. E. Geletukha; V. G. Kravchenko 📂 Article 📅 1966 🏛 Springer 🌐 English ⚖ 443 KB

Antifriction and mechanical properties o

Antifriction and mechanical properties of polymer compositions based on silicone adhesives

✍ Yu. A. Evdokimov 📂 Article 📅 1972 🏛 Springer US 🌐 English ⚖ 278 KB

Filler particle size and mechanical prop

Filler particle size and mechanical properties of polymers

✍ Harvey Alter 📂 Article 📅 1965 🏛 John Wiley and Sons 🌐 English ⚖ 315 KB 👁 2 views

Effect of fillers and wear on the mechan

Effect of fillers and wear on the mechanical properties of polypropylene coatings

✍ A. P. Makushkin 📂 Article 📅 1974 🏛 Springer 🌐 English ⚖ 495 KB

Effects of filler–filler and polymer–fil

Effects of filler–filler and polymer–filler interactions on rheological and mechanical properties of HDPE–wood composites

✍ Han-Xiong Huang; Jing-Jing Zhang 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 599 KB

## Abstract High‐density polyethylene (HDPE)–wood composite samples were prepared using a twin‐screw extruder. Improved filler–filler interaction was achieved by increasing the wood content, whereas improved polymer–filler interaction was obtained by adding the compatibilizer and increasing the mel