𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Mechanical Behaviour of Hazelnut under Compression Loading

✍ Scribed by M. Güner; E. Dursun; İ.G. Dursun

Publisher
Elsevier Science
Year
2003
Tongue
English
Weight
139 KB
Volume
85
Category
Article
ISSN
1537-5110

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical Behaviour of Macadamia Nut un
Mechanical Behaviour of Macadamia Nut under Compression Loading
✍ Gilberto C. Braga; Sandra M. Couto; Tetuo Hara; Jayme T.P. Almeida Neto 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 162 KB

The operation of cracking Macadamia nuts is the most critical and delicate step for achieving high-quality kernels. The nuts, usually at high moisture content, are dried to a recommended moisture, before cracking, in a process that takes from 3 to 4 weeks at the expense of large energy consumption.

Mechanical properties of nanosilica/poly
Mechanical properties of nanosilica/polypropylene composites under dynamic compression loading
✍ Mohd Firdaus Omar; Hazizan Md Akil; Zainal Arifin Ahmad 📂 Article 📅 2011 🏛 Society for Plastic Engineers 🌐 English ⚖ 1013 KB

## Abstract This article presents results on the dynamic mechanical properties of PP‐SiO~2~ nanocomposites, with nanosilica contents of 1, 3, and 5% by weight, at various strain rates using a Split Hopkinson Pressure Bar (SHPB) apparatus. The specimens were prepared using a hot compression techniqu

Mechanical behavior of Al2O3 ceramics un
Mechanical behavior of Al2O3 ceramics under cyclic tension-compression loading
✍ Th. Schneider; H. Harig 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 516 KB

During cyclic deformation, temperature measurements were carried out with thermocouples. On the basis of the thermoelastic effect, a thermometric method is described which allows the determination of the elastic part of the total deformation. Thus effective stress changes can be determined. The syst

Cracked elastic layer under compressive
Cracked elastic layer under compressive mechanical loads
✍ V. Makaryan; M. Sutton; D. Hasanyan; X. Deng 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 529 KB

We consider boundary value problem in which an elastic layer containing a finite length crack is under compressive loading. The crack is parallel to the layer surfaces and the contact between crack surfaces are either frictionless or with adhesive friction or Coulomb friction. Based on fourier inte