๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Mechanical anisotropy and inhomogeneity of an aromatic liquid crystalline polyester

โœ Scribed by J. Sweeney; B. Brew; R.A. Duckett; I.M. Ward


Publisher
Elsevier Science
Year
1992
Tongue
English
Weight
791 KB
Volume
33
Category
Article
ISSN
0032-3861

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


Wear and mechanical properties of reacti
โœ Xianbao Yu; Chun Wei; Deng Xu; Chihua Lu; Jinhong Yu; Shaorong Lu ๐Ÿ“‚ Article ๐Ÿ“… 2006 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 936 KB

## Abstract To improve the performance of unsaturated polyester (UP) under coldโ€heat alternate temperature, selfโ€synthesized reactive thermotropic liquid crystalline polymer (TLCP)โ€methacryloyl copolymer (LCMC), UP, and glass fiber (GF) hybrid composites was prepared by molding technology. The appa

Effect of a filler on the rheological an
โœ V. F. Shumsky; I. P. Getmanchuk; Y. S. Lipatov ๐Ÿ“‚ Article ๐Ÿ“… 2000 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 195 KB ๐Ÿ‘ 2 views

The rheological and mechanical properties of the blends of liquid-crystalline polyester (LCP) and poly(methyl methacrylate) (PMMA) filled with aluminum borate whiskers have been studied. It was established the combined action of reinforcing LCP and filler onto the property of PMMA matrix leads to ma

Reaction kinetics of liquid crystalline
โœ J. Y. Lee; M. J. Shim; H. K. Lee; S. W. Kim ๐Ÿ“‚ Article ๐Ÿ“… 2001 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 212 KB ๐Ÿ‘ 2 views

## Abstract The effect of the molar ratio of diglycidyl ether of 4,4โ€ฒโ€biphenyl (DGEBP) to __p__โ€phenylene diamine (PDA) on the cure reaction rate was studied by the Kissinger and isoconversional equations. The cure mechanism was studied by FTIR analysis and the liquid crystalline phase structure wa

Effects of recycling on morphology and m
โœ Xu, Qโ€ŠW; Man, Hโ€ŠC ๐Ÿ“‚ Article ๐Ÿ“… 2000 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 442 KB ๐Ÿ‘ 2 views

In this work, a virgin Rodrun LC-5000 liquid crystalline polymer was recycled several times by an injection moulding process. The results showed that there is a signiยฎcant decrease in the Young's modulus and the tensile strength after the recycling operation, while there is almost no change in the t