๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Mechanical and thermal properties of toughened PA6/HDPE/SEBS-g-MA/Clay nanocomposite

โœ Scribed by Attari, Marzieh; Arefazar, Ahmad; Bakhshandeh, Gholamreza

Book ID
121714253
Publisher
Society for Plastic Engineers
Year
2014
Tongue
English
Weight
294 KB
Volume
55
Category
Article
ISSN
0032-3888

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Fibre reinforced nanocomposites: Mechani
Fibre reinforced nanocomposites: Mechanical properties of PA6/clay and glass fibre/PA6/clay nanocomposites
โœ Mike J. Clifford; Tong Wan ๐Ÿ“‚ Article ๐Ÿ“… 2010 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 338 KB

In this paper, the effect of two different reinforcements: clay at the nanoscale and glass fibres at the micro-scale, on the mechanical properties of PA/clay and GF/PA/clay are studied. The Halpin-Tsai model is used to predict the modulus of PA/Clay and GF/PA/Clay, both of which are influenced by tw

Melt preparation and investigation of pr
Melt preparation and investigation of properties of toughened Polyamide 66 with SEBS-g-MA and their nanocomposites
โœ Roohollah Dermanaki Farahani; Ahmad Ramazani S.A. ๐Ÿ“‚ Article ๐Ÿ“… 2008 ๐Ÿ› Elsevier Science โš– 927 KB

Polyamide 66/SEBS-g-M alloys and their nanocomposites were prepared by melt compounding using a twin screw extruder. The mechanical properties, rheological behavior and morphology of these alloys and their nanocomposites were investigated. Morphological investigations with different methods show pse

Morphology, thermal behavior, and mechan
Morphology, thermal behavior, and mechanical properties of PA6/UHMWPE blends with HDPE-g-MAH as a compatibilizing agent
โœ Zhanhai Yao; Zhihui Yin; Guoen Sun; Chaozhong Liu; Jin Tong; Luquan Ren; Jinghua ๐Ÿ“‚ Article ๐Ÿ“… 2000 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 168 KB ๐Ÿ‘ 2 views

A functionalized high-density polyethylene (HDPE) with maleic anhydride (MAH) was prepared using a reactive extruding method. This copolymer was used as a compatibilizer of blends of polyamide 6 (PA6) and ultrahigh molecular weight polyethylene (UHMWPE). Morphologies were examined by a scanning elec