✦ LIBER ✦

Measurements and modeling of Reynolds stress and turbulence production in a swirl-supported, direct-injection diesel engine

✍ Scribed by Paul C. Miles; Marcus Megerle; Zac Nagel; Rolf D. Reitz; Volker Sick

Book ID: 108496657
Publisher: Elsevier Science
Year: 2002
Tongue: English
Weight: 319 KB
Volume: 29
Category: Article
ISSN: 1540-7489
DOI: 10.1016/s1540-7489(02)80092-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The influence of fuel injection and heat

The influence of fuel injection and heat release on bulk flow structures in a direct-injection, swirl-supported diesel engine

✍ Paul C. Miles; Leif Hildingsson; Anders Hultqvist 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 753 KB

Numerical Modeling and Experimental Stud

Numerical Modeling and Experimental Study of Combustion and Soot Formation in a Direct Injection Diesel Engine

✍ Chan, T. L.; Cheng, X. B. 📂 Article 📅 2007 🏛 American Chemical Society 🌐 English ⚖ 601 KB

Measurements and analysis of load and sp

Measurements and analysis of load and speed effects on the instantaneous wall heat fluxes in a direct injection air-cooled diesel engine

✍ C. D. Rakopoulos; G. C. Mavropoulos; D. T. Hountalas 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 472 KB 👁 2 views

Measurement and simulation of fuel injec

Measurement and simulation of fuel injection pipe pressure and study of its effect on the heat release in a direct injection diesel engine

✍ Shin, Bum-sik ;Chun, Kwang Min ;Lee, Hang-kyung 📂 Article 📅 1997 🏛 Springer-Verlag 🌐 Korean ⚖ 891 KB

95/01799 Analysis of combustion and poll

95/01799 Analysis of combustion and pollutants formation in a direct injection diesel engine using a multi-zone model

📂 Article 📅 1995 🏛 Elsevier Science ⚖ 211 KB

00/03597 Measurements and analysis of lo

00/03597 Measurements and analysis of load and speed effects on the instantaneous wall heat fluxes in a direct injection air-cooled diesel engine

📂 Article 📅 2000 🏛 Elsevier Science ⚖ 229 KB

This paper describes a simple analysis for the prediction of pressure within a spark ignition engine. This is done by modelling the combustion process using the Wieb function approach, which is an exponential function in the form 4' = 1 -em"'"', to calculate the rate of fuel burned. By careful selec