✦ LIBER ✦

Mathematical simulation of hydrogen production via methanol steam reforming using double-jacketed membrane reactor

✍ Scribed by Chi-Hua Fu; Jeffrey C.S. Wu

Book ID: 108143052
Publisher: Elsevier Science
Year: 2007
Tongue: English
Weight: 265 KB
Volume: 32
Category: Article
ISSN: 0360-3199
DOI: 10.1016/j.ijhydene.2007.07.039

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Efficient Hydrogen Production via Methan

Efficient Hydrogen Production via Methanol Steam Reforming by Preventing Back-permeation of Hydrogen in a Palladium Membrane Reactor

✍ Itoh, N.; Kaneko, Y.; Igarashi, A. 📂 Article 📅 2002 🏛 American Chemical Society 🌐 English ⚖ 242 KB

Selective production of hydrogen via oxi

Selective production of hydrogen via oxidative steam reforming of methanol using Cu–Zn–Ce–Al oxide catalysts

✍ Sanjay Patel; K.K. Pant 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 263 KB

Sequential simulation of dense oxygen pe

Sequential simulation of dense oxygen permeation membrane reactor for hydrogen production from oxidative steam reforming of ethanol with ASPEN PLUS

✍ Yun Jin; Zebao Rui; Ye Tian; Yuesheng Lin; Yongdan Li 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 484 KB

Methanol steam reforming in supported Pd

Methanol steam reforming in supported Pd membrane reactor The supported Pd membrane is promising for the production of high-purity hydrogen from catalytic steam reforming of methanol. At the 35°C reaction temperature, the catalyst activity and stability are promoted by increasing the alumina content. Here a compact doublejacketed reactor has generated high-purity hydrogen directly from steam reforming of methanol, with no need for external purification and a much higher recovery yield.

📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 110 KB

environments was investigated. The corrosion rate is higher under 'outlet' conditions at 700°C compared to standard conditions at 650°C and 'inlet' conditions at 600°C. The corrosion potential increases with time when a protective corrosion layer is formed. Eventually it reaches a more positive pote