𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Mathematical modeling of the temperature fields during the solidification of metal in molds of complicated profile

✍ Scribed by V. L. Rvachev; A. N. Shevchenko; T. I. Sheiko; J. Wicker; V. Shapiro

Publisher
Springer US
Year
1998
Tongue
English
Weight
439 KB
Volume
88
Category
Article
ISSN
1573-8795

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Mathematical modeling of the in-mold coa
Mathematical modeling of the in-mold coating process
✍ J. M. Castro; R. M. Griffith πŸ“‚ Article πŸ“… 1990 πŸ› Society for Plastic Engineers 🌐 English βš– 631 KB

## Abstract Fiber glass reinforced polyester parts compression molded from sheet molding compound (SMC) are prone to such surface inconsistencies as porosity and sinks. Even though it appears that some of these defects could be eliminated by techniques such as vacuum molding, the resulting surface,

Effect of Melt and Mold Temperatures on
Effect of Melt and Mold Temperatures on the Solidification Behavior of HDPE during Gas-Assisted Injection Molding: An Enthalpy Transformation Approach
✍ Bin Yang; Xiao-Rong Fu; Wei Yang; Shui-Po Liang; Nan Sun; Sheng Hu; Ming-Bo Yang πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 532 KB

## Abstract The influence of melt and mold temperature on the solidification behavior of HDPE during the GAIM process is studied using a transient‐heat‐transfer model of the enthalpy transformation approach. An in situ measurement of temperature decay in the mold cavity was carried out to verify th