𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Material Modelling of Short Fiber Reinforced Thermoplastic for the FEA of a Clinching Test

✍ Scribed by Behrens, B.-A.; Rolfes, R.; Vucetic, M.; Reinoso, J.; Vogler, M.; Grbic, N.

Book ID
127354440
Publisher
Elsevier
Year
2014
Tongue
English
Weight
762 KB
Volume
18
Category
Article
ISSN
2212-8271

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Fracture toughness of a short-fiber rein
Fracture toughness of a short-fiber reinforced thermoplastic
✍ W. E. Haskell III; S. P. Petrie; R. W. Lewis πŸ“‚ Article πŸ“… 1983 πŸ› Society for Plastic Engineers 🌐 English βš– 472 KB

## Abstract Thin plates of carbon short‐fiber reinforcement polycarbonate were injection molded. The mold was designed to produce a uniform melt flow across the cavity and an extended knock‐out pin was incorporated to form a circular hole at the center of the molded plate. The elastic constants of

Short-term flexural creep behavior and m
Short-term flexural creep behavior and model analysis of a glass-fiber-reinforced thermoplastic composite leaf spring
✍ C. Subramanian; S. Senthilvelan πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 627 KB

## Abstract Present work investigated the short‐term flexural creep performance of fiber reinforced thermoplastic injection molded leaf springs. Unreinforced polypropylene, 20 wt % short and 20 wt % long glass fiber reinforced polypropylene materials were injection‐molded into constant thickness va