𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Matching of a rectangular waveguide T junction with unequal power division

✍ Scribed by T. Sehm; A. Lehto; A. V. Rälsänen

Publisher
John Wiley and Sons
Year
1997
Tongue
English
Weight
116 KB
Volume
14
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Matching of a rectangular wa¨eguide T junction with two matching posts and a splitter is proposed. An unequal power di¨ision is realized without a phase difference between the output ports. A return loss more than 30 dB o¨er the frequency range 37.0᎐39.5 GHz can be achie¨ed according to simulations. Measurements show a return loss larger than 18 dB.

📜 SIMILAR VOLUMES

Design equations of arbitrary power spli
Design equations of arbitrary power split ratio waveguide T-junctions using a curve fitting approach
✍ Songnan Yang; Aly E. Fathy 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 322 KB

Design equations have been developed for the design of an H-plane rectangular waveguide T-junction with an arbitrary power split. These design equations were derived using curve fitting of data produced from a large number of EM simulation runs. A design procedure has been successfully developed and

Reflection characteristics of a metallic
Reflection characteristics of a metallic waveguide grating with rectangular grooves as a frequency-selective reflector
✍ T. Thumvongskul; T. Shiozawa 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 164 KB

## Abstract A proper duty cycle of the grating period which provides the maximum reflection for a metallic waveguide grating with rectangular grooves is found by the mode‐matching approach. For narrowband reflection characteristics, a grating with sufficient numbers of periods and adequately small

Numerical analysis of a fiber connected
Numerical analysis of a fiber connected to an inhomogeneous embedded waveguide with rectangular cross-section
✍ M. Momoda; T. Miyamoto; K. Yasumoto 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 124 KB

## Abstract The Fourier series expansion method is applied to realize an accurate full‐vectorial analysis of the problem of a step‐index optical fiber connected to an inhomogeneous embedded optical waveguide with rectangular cross section, using periodic boundary conditions in both transverse direc