𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting

✍ Scribed by E. Yasa; J.-P. Kruth; J. Deckers

Publisher
International Academy for Production Engineering
Year
2011
Tongue
English
Weight
318 KB
Volume
60
Category
Article
ISSN
0007-8506

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Alumina–zirconium ceramics synthesis by
Alumina–zirconium ceramics synthesis by selective laser sintering/melting
✍ I. Shishkovsky; I. Yadroitsev; Ph. Bertrand; I. Smurov πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 820 KB

In the present paper, porous refractory ceramics synthesized by selective laser sintering/melting from a mixture of zirconium dioxide, aluminum and/or alumina powders are subjected to optical metallography and X-ray analysis to study their microstructure and phase composition depending on the laser

Manufacturing of individual biodegradabl
Manufacturing of individual biodegradable bone substitute implants using selective laser melting technique
✍ Markus Lindner; Simon Hoeges; Wilhelm Meiners; Konrad Wissenbach; Ralf Smeets; R πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 439 KB

## Abstract The additive manufacturing technique selective laser melting (SLM) has been successfully proved to be suitable for applications in implant manufacturing. SLM is well known for metal parts and offers direct manufacturing of three‐dimensional (3D) parts with high bulk density on the base

Experimental studies on selective laser
Experimental studies on selective laser melting of metallic parts
✍ H. Meier; Ch. Haberland πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 353 KB

## Abstract Laser assisted generative production techniques like Selective Laser Melting (SLM) are novel but complex near net shape fabrication methods. The present paper describes properties of metallic specimens generated by SLM. Therefore various process parameters were observed to evaluate thei