✦ LIBER ✦

Magnetic properties and workability of 6.5% silicon steel sheet manufactured in continuous CVD siliconizing line

✍ Scribed by T. Yamaji; M. Abe; Y. Takada; K. Okada; T. Hiratani

Book ID: 113320397
Publisher: Elsevier Science
Year: 1994
Tongue: English
Weight: 174 KB
Volume: 133
Category: Article
ISSN: 0304-8853
DOI: 10.1016/0304-8853(94)90521-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Magnetic properties and workability of 6

Magnetic properties and workability of 6.5% Si steel sheet

✍ H. Haiji; K. Okada; T. Hiratani; M. Abe; M. Ninomiya 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 529 KB

Magnetic properties and workability of 6

Magnetic properties and workability of 6.5% Si steel sheet

✍ H. Haiji; K. Okada; T. Hiratani; M. Abe; M. Ninomiya 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 529 KB

Siliconization and aluminization up to 6

Siliconization and aluminization up to 6.5 wt% of iron sheets: evolution of magnetomechanical and magnetic properties

✍ S. Crottier-Combe; S. Audisio; J. Degauque; B. Viala 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 243 KB

Effects of sintering temperature and sec

Effects of sintering temperature and secondary elements on the soft magnetic properties of PM 6.5% silicon steel: H.S. Chung et al, (Korea Inst of Machinery and Metals)

📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 129 KB

Study of vacuum levels in the annealing

Study of vacuum levels in the annealing of high silicon (6.4 wt%) non-oriented magnetic steel sheets obtained by rapid quenching and its incidence on grain size, texture and core losses

✍ I. Ibarrondo; J. Degauque 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 90 KB

In the present study, high silicon (6.4 wt%) -iron microcrystalline ribbons (25 mm;38 m) were obtained directly from its melted state by rapid quenching. The material thus obtained was then submitted to heat treatment. This soft magnetic material is mainly used as cores in high-performance electric