✦ LIBER ✦

Magnetic characterization of cold rolled and aged AISI 304 stainless steel

✍ Scribed by S. Palit Sagar; B. Ravi Kumar; G. Dobmann; D.K. Bhattacharya

Book ID: 108218580
Publisher: Elsevier Science
Year: 2005
Tongue: English
Weight: 651 KB
Volume: 38
Category: Article
ISSN: 0963-8695
DOI: 10.1016/j.ndteint.2005.04.004

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Cold rolling texture in AISI 304 stainle

Cold rolling texture in AISI 304 stainless steel

✍ B.Ravi Kumar; A.K Singh; Samar Das; D.K Bhattacharya 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 517 KB

Ellipsometric characterization of an AIS

Ellipsometric characterization of an AISI 304 stainless steel protective coating

✍ J.J Fuentes-Gallego; E Blanco; L Esquivias 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 169 KB

Characterization of cyclic plastic bendi

Characterization of cyclic plastic bending of austenitic AISI 304 stainless steel

✍ M.R. Bayoumi; A.K. Abd El Latif 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 811 KB

Interface segregation study by Auger ele

Interface segregation study by Auger electron spectroscopy of cold-worked AISI-304 and -304L stainless steels

✍ M. García-Mazarío; M. Hernández-Mayoral; A. M. Lancha 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 223 KB

Friction stir welding of AISI 304 austen

Friction stir welding of AISI 304 austenitic stainless steel

✍ C. Meran; V. Kovan; A. Alptekin 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 191 KB

## Abstract The objective of this work is to demonstrate the feasibility of friction stir welding (FSW) AISI 304 austenitic stainless steels. The tool used was formed of a tungsten‐based alloy. The specimens were welded on an 11 kW vertical milling machine. Defect‐free welds were produced on 2.5 mm

Processing map for cold and hot working

Processing map for cold and hot working of as-cast stainless steel type AISI 304

✍ S. Venugopal; S. L. Mannan; Y. V. R. K. Prasad 📂 Article 📅 1993 🏛 Springer 🌐 English ⚖ 997 KB