✦ LIBER ✦

Machining Performance and Optimizing Machining Parameters of Al 2 O 3 –TiC Ceramics Using EDM Based on the Taguchi Method

✍ Scribed by Lin, Yan-Cherng; Wang, A-Cheng; Wang, Der-An; Chen, Chih-Cherng

Book ID: 120930453
Publisher: Taylor and Francis Group
Year: 2009
Tongue: English
Weight: 687 KB
Volume: 24
Category: Article
ISSN: 1042-6914
DOI: 10.1080/10426910902769285

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Modeling and analysis of the effects of

Modeling and analysis of the effects of machining parameters on the performance characteristics in the EDM process of Al2O3+TiC mixed ceramic

✍ Ko-Ta Chiang 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 272 KB

Applying grey forecasting method for fit

Applying grey forecasting method for fitting and predicting the performance characteristics of an electro-conductive ceramic (Al2O3+30%TiC) during electrical discharge machining

✍ Ko-Ta Chiang; Fu-Ping Chang 📂 Article 📅 2006 🏛 Springer 🌐 English ⚖ 152 KB

Investigating the machinability evaluati

Investigating the machinability evaluation of Hadfield steel in the hard turning with Al2O3/TiC mixed ceramic tool based on the response surface methodology

✍ Jenn-Tsong Horng; Nun-Ming Liu; Ko-Ta Chiang 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 985 KB

In this study a series of tests were conducted in order to investigate the machinability evaluation of Hadfield steel in the hard turning. The austenitic Hadfield steels, containing about 1.0-1.2% C and 11-14% Mn in mass, have excellent wear-resistance property and are extensively used in various en

Influence of alumina content on the nucl

Influence of alumina content on the nucleation crystallization and microstructure of barium fluorphlogopite glass-ceramics based on 8SiO2·y Al2O3·4MgO·2MgF2·BaO Part IIMicrostructure, microhardness and machinability

✍ J. Henry; R. G. Hill 📂 Article 📅 2004 🏛 Springer 🌐 English ⚖ 604 KB