𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Lubricational characteristics of hypereutectic Al-Si P/M alloy in hot forging

✍ Scribed by Yukio Hirai; Kouzou Kanayama; Mamoru Nakamura; Katsushi Kubo; Hideo Sano

Publisher
Springer
Year
1989
Tongue
English
Weight
241 KB
Volume
8
Category
Article
ISSN
0261-8028

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Fabrication of bulk metallic glasses in
Fabrication of bulk metallic glasses in the alloy system Fe–C–Si–B–P–Cr–Mo–Al using hot metal and industrial ferro-alloys
✍ Hongxiang Li; Seonghoon Yi πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 406 KB

Fe-base bulk metallic glasses in the alloy system Fe-C-Si-B-P-Cr-Mo-Al have been developed using hot metal and industrial ferro-alloys. The amorphous alloys can be cast into fully amorphous rods with diameters of up to 4 mm, demonstrating high glass-forming ability and high strength (>3 GPa). Therma

Corrosion characteristics of Al-Si-Mg/Si
Corrosion characteristics of Al-Si-Mg/SiCp composites with varying Si/Mg molar ratio in neutral chloride solutions
✍ R. Escalera-Lozano; M. A. Pech-Canul; M. I. Pech-Canul; P. Quintana πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 German βš– 493 KB

## Abstract The corrosion resistance of Al‐Mg‐Si/SiC~p~ composites produced by the pressureless infiltration method [using SiC~p~ preforms with 50% porosity containing rice hull ash (RHA) and four custom‐made alloys with varying Si/Mg molar ratio] was evaluated in neutral 0.1 M NaCl solutions. The