𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Lubrication behavior of Y-TZP/Al2O3/Mo nanocomposites at high temperature

✍ Scribed by Yong-Sheng Zhang; Li-Tian Hu; Jian-Min Chen; Wei-Min Liu


Publisher
Elsevier Science
Year
2010
Tongue
English
Weight
390 KB
Volume
268
Category
Article
ISSN
0043-1648

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Fabrication of complex-shaped Y-TZP/Al2O
✍ Yongsheng Zhang; Litian Hu; Jianmin Chen; Weimin Liu πŸ“‚ Article πŸ“… 2009 πŸ› Elsevier Science 🌐 English βš– 809 KB

Gelcasting is a very useful technique for producing ceramic green parts with complex shapes. Although it has been successfully applied to ceramic systems consisting of micron size powders, there is little report on gelcasting of ceramics containing nanoparticles. In this work, ceramic system with na

Biaxial flexure strength and low tempera
✍ Seiji Ban; Hideo Sato; Yasuhiko Suehiro; Hideo Nakanishi; Masahiro Nawa πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 283 KB

## Abstract The purpose of the present study was to evaluate the mechanical durability of a zirconia/alumina nanocomposite stabilized with cerium oxide (Ce‐TZP/Al~2~O~3~ nanocomposite) in comparison to yttria‐stabilized tetragonal zirconia polycrystals (Y‐TZP) and discuss its application on ceramic

Unlubricated Wear Behavior of Ce-TZP/ Al
✍ G. Yang; J.-C. Li; G.-C. Wang; M. Yashima; S.-L. Min; T.-C. Chen πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 574 KB

Unlubricated friction and wear tests of Ce‐TZP/Al~2~O~3~ nanocomposites against bearing steel were performed. In order to elucidate the wear mecahnism, the morphological investigation and phase structural analysis of worn surfaces were carried out by X‐ray diffractometer and scanning electron micros

High-temperature tensile properties of M
✍ S.F. Hassan; M.J. Tan; M. Gupta πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 859 KB

Mg/1.1Al 2 O 3 nanocomposite was synthesized using solidification process called disintegrated melt deposition technique followed by hot extrusion. Microstructural characterization showed that reasonably uniform distribution of reinforcement leads to significant grain refinement of commercially pure

Phase stability after aging and its infl
✍ Tanaka, Kenji ;Tamura, Jiro ;Kawanabe, Keiichi ;Nawa, Masahiro ;Uchida, Masaki ; πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 English βš– 266 KB

## Abstract Recently zirconia/alumina composites have been examined by many researchers as the new generation of bearing materials in total joint replacements. In this study, the phase stability of a Ce‐TZP/Al~2~O~3~ nanocomposite and conventional Y‐TZP after aging, and its influence on wear resist