𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Low-profile tetra wire-patch antenna for automotive applications

✍ Scribed by L. Lizzi; F. Ferrero; J. Ribero; R. Staraj

Book ID
112145035
Publisher
John Wiley and Sons
Year
2012
Tongue
English
Weight
994 KB
Volume
54
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Broadband low-profile wire-patch antenna
Broadband low-profile wire-patch antenna
✍ L. Zaid; R. Staraj 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 184 KB

## Abstract This paper describes a wire‐patch air‐filled antenna, made up of two metallic stacked plates and center fed by a coaxial probe. This radiating element, which uses the original resonance phenomenon due to the presence of wires between the ground plane, the first and the second metallic s

Low-profile GSM-DCS-PCS-UMTS wire patch
Low-profile GSM-DCS-PCS-UMTS wire patch antenna on small ground plane
✍ Labhib Assila; Jean-Marc Ribero; Robert Staraj; Jean-Lou Dubard 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 266 KB

## Abstract A small radiating element, designed to work simultaneously in GSM‐DCS‐PCS‐UMTS‐frequency bands, totally made up of metallic square parts on an air substrate is described. The total size of the supporting ground plane is smaller than λ/2 for the lower working frequency. By stacking two s

Low-profile ultra-wideband antenna for m
Low-profile ultra-wideband antenna for mobile phone applications
✍ Kin-Lu Wong; Ting-Chih Tseng; Pey-Ling Teng 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 98 KB

## Abstract A novel low‐profile ultra‐wideband (UWB) antenna suitable for mobile‐phone applications as an internal antenna is presented. The proposed antenna mainly comprises a planar metal‐plate monopole folded into a low‐profile structure and a matching tuning portion for achieving a very wide op