Low phase noise bond wire VCO for DVB-H
✍ Scribed by Ki-Jin Kim; K. H. Ahn; T. H. Lim
- Book ID
- 102522796
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 256 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A low phase noise VCO with bond wire inductor for DVB‐H is implemented in TSMC CMOS 0.18 μm. The bond wire VCO exhibits −137 dBc/Hz at 1 MHz with the 5 mA current consumption. To meet the DVB‐H phase noise requirement, bond wire modeling is introduced in this paper. Due to the bond wire characteristics, Q value of the VCO inductor is more than 25 at 1 GHz. The proposed wire bond inductor provides an additional frequency tuning option after IC fabrication by modifying the length of the wire bond. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 859–863, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23228
📜 SIMILAR VOLUMES
## Abstract An even‐mode power combining technique was developed for a high‐performance K‐band push–push voltage control oscillator (VCO) in standard 0.18 μm CMOS technology. The VCO was designed based on linear time variant (LTV) phase noise model. The obtained frequency tuning range and maximum o
## Abstract In this article, a low‐power low‐phase‐noise 48‐GHz CMOS LC voltage‐control oscillator (VCO) using standard 0.13‐μm CMOS technology is reported. Low‐power consumption is achieved by maximizing the equivalent parallel resistance of the LC tank, while low‐phase‐noise is achieved by suppre