Low-frequency assessment of the in situ acoustic absorption of materials in rooms: an inverse problem approach using evolutionary optimization

✍ Scribed by Guillaume Dutilleux; Franck C. Sgard; Ulf R. Kristiansen

• Publisher: John Wiley and Sons
• Year: 2002
• Tongue: English
• Weight: 167 KB
• Volume: 53
• Category: Article
• ISSN: 0029-5981
• DOI: 10.1002/nme.376

✦ Synopsis

Abstract

The in situ assessment of the acoustic absorption of materials is often a necessity. The need to cover the whole frequency range of interest for the building engineer has led the authors to an approach involving two frequency‐complementary measurement methods. This paper deals with the part dedicated to low frequencies. The measurement is defined here as a boundary inverse interior problem. A numerical model of the room under investigation, allowing for the computation of the pressure field in the volume, given impedance boundary conditions and a point source, is combined to a global optimization algorithm. The algorithm explores the set of possible boundary conditions in order to minimize the difference between the computed pressure values and the one observed at a few measurement points, leading to the determination of all the boundary conditions at a time. In practice, the finite element method (FEM) or the finite difference method (FDM) is used here to model the room and an Evolution Strategy as the optimization tool. After describing the ES operators, a numerical study is carried out on simulated measurements, both on problem‐ and algorithm‐specific parameters, in the case of an academic two‐dimensional room geometry. The method is then applied to a three‐dimensional room with promising results. Copyright © 2002 John Wiley & Sons, Ltd.