Low frequency acoustic ground impedance measurement techniques

✍ Scribed by Mark W. Sprague; Richard Raspet; Henry E. Bass; James M. Sabatier

• Publisher: Elsevier Science
• Year: 1993
• Tongue: English
• Weight: 1004 KB
• Volume: 39
• Category: Article
• ISSN: 0003-682X
• DOI: 10.1016/0003-682x(93)90013-v

✦ Synopsis

ABSTRA CT

The low frequency (below 150 Hz) acoustic ground impedance was determined on a large uncultivated field using an impedance meter, the probe microphone method, a modified Biot-Stoll type calculation, and the phase gradient method. The impedance measured with the impedance meter has lower real and imaginary parts than the impedance determined from the probe microphone measurements. The modified Biot-Stoll type description of acoustic to seismic transfer based upon seismic and acoustic measurements gives an impedance which is consistent with probe microphone measurements. The impedance measured by the phase gradient method is largely consistent with the other measurements, but shows much more structure. This structure is believed to be caused by unwanted reflections during the measurement procedure rather than by actual structure in the ground impedance undetected by the other methods.