✦ LIBER ✦

Losses and flux penetration in non-grain-oriented low-loss steel with nonsinusoidal excitation

✍ Scribed by O'Kelly, D.

Book ID: 114446630
Publisher: The Institution of Electrical Engineers
Year: 1988
Weight: 712 KB
Volume: 135
Category: Article
ISSN: 0143-702X
DOI: 10.1049/ip-a-1:19880031

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Flux penetration and losses in steel pla

Flux penetration and losses in steel plate with nonsinusoidal magnetisation

✍ O'Kelly, D. 📂 Article 📅 1988 🏛 The Institution of Electrical Engineers ⚖ 443 KB

Flux penetration and losses in steel pla

Flux penetration and losses in steel plate with sinusoidal magnetisation

✍ O'Kelly, D. 📂 Article 📅 1980 🏛 The Institution of Electrical Engineers 🌐 English ⚖ 532 KB

Relation between orientation and core lo

Relation between orientation and core loss in grain-oriented 3% silicon steel with high permeability

✍ Iwayama, K.; Taguchi, S.; Kuroki, K.; Wada, T. 📂 Article 📅 1982 🏛 Elsevier Science 🌐 English ⚖ 320 KB

Separation of hysteresis and eddy curren

Separation of hysteresis and eddy current components of iron loss in 0.5 mm low-silicon non-oriented steel by the ‘distorted wave method’

✍ G.H. Shirkoohi; A.J. Moses 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 279 KB

Study of vacuum levels in the annealing

Study of vacuum levels in the annealing of high silicon (6.4 wt%) non-oriented magnetic steel sheets obtained by rapid quenching and its incidence on grain size, texture and core losses

✍ I. Ibarrondo; J. Degauque 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 90 KB

In the present study, high silicon (6.4 wt%) -iron microcrystalline ribbons (25 mm;38 m) were obtained directly from its melted state by rapid quenching. The material thus obtained was then submitted to heat treatment. This soft magnetic material is mainly used as cores in high-performance electric