Fluorescence behavior of poly(3-alkylthiophenes) (P3ATs) in poly(methyl methacrylate) (PMMA) films was studied under tensile loadings. The elastic deformation of the matrix induced by small strains up to 0.2% had a greater influence on timeresolved fluorescence rather than the steady-state one from
Longitudinal sound velocity in uniaxially stretched rubberlike polymers
✍ Scribed by S. H. Anders; H. H. Krbecek; M. Pietralla
- Publisher
- John Wiley and Sons
- Year
- 1997
- Tongue
- English
- Weight
- 335 KB
- Volume
- 35
- Category
- Article
- ISSN
- 0887-6266
No coin nor oath required. For personal study only.
✦ Synopsis
We present a new method to interpret data obtained by Brillouin-scattering from oriented networks. Because in rubberlike samples the transverse sound waves are normally not observable, it is not possible to extract the complete set of elastic constants. We will show that by combining a model of the orientation process with the lattice-model from Kondo and Igarashi, force constants can be determined from the sound velocities. These force constants can be discussed in terms of molecular conformations and interactions. The anisotropic hypersound velocity was measured in polyurethane-and polysiloxane networks. With the help of the combined orientation-latticemodel evaluation, different kinds of forces can be distinguished. By comparing the force constants with Raman-or infrared spectroscopic data, information about the conformation of the polymer chains can be determined. The effective force constants of the segments are an order of magnitude lower than that of the polymer main chains and the ratio of force constants along and between the segments lies between 1 : 1 to 5 : 1.
📜 SIMILAR VOLUMES
## Abstract The steady‐state fluorescence properties of naphthalene‐labeled polymers dispersed in poly(methyl methacrylate) (PMMA) cast films were studied under tensile loadings at 80°C. The labeled polymers were composed of methyl methacrylate (MMA) and 1‐naphthylmethyl methacrylate (NMMA). Three
Steady-state and time-resolved fluorescence properties of poly( N-vinylcarbazole) (PVCz) dispersed in a polystyrene (PS) cast film were studied under tensile loadings at room temperature. The excited monomer emission of PVCz located around 350 nm decreased with increasing applied tensile strain from